TigerSwitch 10/100 - SMC
TigerSwitch 10/100 - SMC
TigerSwitch 10/100 - SMC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USING THE SYSTEM CONFIGURATION PROGRAM<br />
Configuring STA for Ports<br />
The following figure and table describe port STA configuration.<br />
Spanning Tree Port Configuration : Unit 1 Port 1 - 12<br />
================================<br />
Fast forwarding on all ports : [Enable] [Disable]<br />
Port Type Priority Cost FastForwarding<br />
-----------------------------------------------------<br />
1 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
2 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
3 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
4 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
5 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
6 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
7 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
8 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
9 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
<strong>10</strong> <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
11 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
12 <strong>10</strong>/<strong>10</strong>0TX 128 19 ENABLED<br />
<br />
Use or arrow keys to move. to select,<br />
other keys to make changes.<br />
Parameter Default Description<br />
Fast<br />
forwarding on<br />
all ports<br />
Enabled See “FastForwarding” in this table.<br />
Type Shows port type as:<br />
<strong>10</strong>/<strong>10</strong>0TX : <strong>10</strong>BASE-T / <strong>10</strong>0BASE-TX<br />
<strong>10</strong>0FX : <strong>10</strong>0BASE-FX<br />
<strong>10</strong>00SX : <strong>10</strong>00BASE-SX<br />
Priority 128 Defines the priority for the use of a port in the<br />
STA algorithm. If the path cost for all ports on a<br />
switch are the same, the port with the highest<br />
priority (i.e., lowest value) will be configured as<br />
an active link in the Spanning Tree. Where more<br />
than one port is assigned the highest priority,<br />
the port with lowest numeric identifier will be<br />
enabled. The range is 0 - 255.<br />
2-33