TigerSwitch 10/100 - SMC
TigerSwitch 10/100 - SMC
TigerSwitch 10/100 - SMC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Parameter Description<br />
USING THE SYSTEM CONFIGURATION PROGRAM<br />
Default Gateway Gateway used to pass trap messages from the system’s<br />
agent to the management station. Note that the gateway<br />
must be defined if the management station is located in<br />
a different IP segment. The default value is null.<br />
IP State Specifies whether IP functionality is enabled via manual<br />
configuration, or set by Boot Protocol (BOOTP).<br />
Options include:<br />
USER-CONFIG - IP functionality is enabled based on the<br />
default or user specified IP Configuration. (This is the<br />
default setting.)<br />
BOOTP Get IP - IP is enabled but will not function until<br />
a BOOTP reply has been received. BOOTP requests will<br />
be periodically broadcast by the switch in an effort to<br />
learn its IP address. (BOOTP values can include the IP<br />
address, default gateway, subnet mask, and TFTP server<br />
IP.)<br />
2-13