Download - SMC

More documents

Recommendations

Info

Configuring the Barricade Router 36 Dynamic IP The Host Name is optional, but may be required by some ISPs. The default MAC address is set to the WAN’s physical interface on the Barricade Router. Use this address when registering for Internet service, and do not change it unless required by your ISP. If your ISP used the MAC address of an Ethernet card as an identifier when first setting up your broadband account, only connect the PC with the registered MAC address to the Barricade Router and click the Clone MAC Address button. This will replace the current Barricade Router MAC address with the already registered Ethernet card MAC address. If you are unsure of which PC was originally set up by the broadband technician, call your ISP and request that they register a new MAC address for your account. Register the default MAC address of the Barricade Router.
Point-to-Point Over Ethernet (PPPoE) Advanced Setup Enter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is normally optional, but may be required by some service providers. The MTU (Maximum Transmission Unit) governs the maximum size of the data packets. Leave this on the default value (1454) unless you have a particular reason to change it. Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 10 minutes) 37
Page 1: SMC7004ABR
Page 4 and 5: COPYRIGHT Information furnished by
Page 6 and 7: Compliances ii EC Conformance Decla
Page 8 and 9: TABLE OF CONTENTS iv System . . . .
Page 10 and 11: About the Barricade Router Features
Page 12 and 13: Installing the Router Hardware Desc
Page 14 and 15: Installing the Router System Requir
Page 16 and 17: Installing the Router 8 3. Connect
Page 18 and 19: Configuring Client TCP/IP 10 5. Sel
Page 20 and 21: Configuring Client TCP/IP 12 Subnet
Page 22 and 23: Configuring Client TCP/IP 14 8. On
Page 24 and 25: Configuring Client TCP/IP 16 5. Cli
Page 26 and 27: Configuring Client TCP/IP 18 3. Loc
Page 28 and 29: Configuring Client TCP/IP 20 2. In
Page 30 and 31: Configuring Client TCP/IP 22 Manual
Page 32 and 33: Configuring Client TCP/IP 24 Pingin
Page 34 and 35: Configuring the Barricade Router Di
Page 36 and 37: Configuring the Barricade Router Na
Page 38 and 39: Configuring the Barricade Router 30
Page 40 and 41: Configuring the Barricade Router Ad
Page 50 and 51: Configuring the Barricade Router LA
Page 72 and 73: Configuring the Print Server 64 3.
Page 74 and 75: Configuring the Print Server Config
Page 84 and 85: Configuring the Print Server 76 The
Page 88 and 89: Configuring the Print Server 80 All
Page 91 and 92: 83 TROUBLESHOOTING The information
Page 93 and 94: 3. Then type ipconfig/renew. Sympto
Page 95 and 96:
87 SPECIFICATIONS Below is an outli
Page 97 and 98:
Industry Canada Class B EN55022 (CI
Page 100:
FOR TECHNICAL SUPPORT, CALL: From U
show all

Download - SMC

Create successful ePaper yourself

Delete template?

Save as template?