Operating Manual - Winkhaus

Operating Manual EAV 13
+ NOTICE!
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
Print-no. 250 020 1
08/2009
Please observe the following instructions when using a automatic
door opener:
• Ensure that the motor can open the closing leaf at any time.
• After unlocking, the control unit sends a signal to the automatic door
opener which must them open out immediately.
• If the automatic door drive is triggered at another point of time, malfunctions
can be caused.
• If the main hook is unlocked manually, the door may not be actuated electrically.
3 Extension keep set/single keeps
4 Center keep FRA
Select the corresponding standard frame parts in the current
program manual (single keeps/alternatively extension keep set):
Program Manual Wood/PVC/ALU 12/2008 493 476 7
Program Overview keep wood Group 2
Program Overview keep PVCu/Vinyl Group 2
Program Overview keep aluminum Group 2
(Example: profile INOUTIC; frame L30; sash H40 Ü extension
keep set U26-192)
When ordering always indicate the DIN direction RS or LS.
Center keep for latch and dead bolt of PVCu/Vinyl, aluminum
and wood/Composite entrance doors.
Select the respective keeps according to the profile systems in
the current program manual (see above).
General
information
1
Important
information
Installation
2
Product
description
3
4
Operation
Programming
5
Maintenance
and care
6
Errors
Troubleshooting
7
Technical
specifications
8
Accessories