Operating Manual - Winkhaus
Operating Manual - Winkhaus
Operating Manual - Winkhaus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operating</strong> <strong>Manual</strong> EAV 33<br />
Aug. <strong>Winkhaus</strong> GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de<br />
Subject to technical changes<br />
Print-no. 250 020 1<br />
08/2009<br />
• The transponder data is transmitted to the reader unit via the antenna.<br />
• An acoustic signal at the reader unit will acknowledge the data transfer.<br />
• The reader checks whether this ttransponder chip is authorized to access and<br />
allows or denies access.<br />
Action Acoustic Signal U Result<br />
Door with transponder n n<br />
authorized<br />
chip „Open“<br />
short, short<br />
• After the enable time has elapsed, another fob can be recognized and evaluated.<br />
• If a transponder chip is unknown to the reader, it does not have access rights and<br />
access will be denied.<br />
Action Acoustic Signal U Result<br />
Door with transponder n nnnn<br />
not authorized<br />
chip „Open“<br />
short, long<br />
4.2.2 Programming<br />
Each transponder set is supplied with 2 programming cards. (programming card =<br />
green; delete-all card = red) These cards are programmed to this reader/control unit.<br />
Teach-in mode<br />
Programmierkarte<br />
Programming card: Set teach-in mode<br />
Ü Teach Transponder chip<br />
Action Acoustic Signal U Result<br />
Pass the programmable n<br />
teach-in mode<br />
card over the antenna short, every 0.5 seconds „active“<br />
General<br />
information<br />
1<br />
Important<br />
information<br />
Installation<br />
2<br />
Product<br />
description<br />
3<br />
4<br />
Operation<br />
Programming<br />
5<br />
Maintenance<br />
and care<br />
6<br />
Errors<br />
Troubleshooting<br />
7<br />
Technical<br />
specifications<br />
8<br />
Accessories
Change language