Operating Manual - Winkhaus

1
2
3
4
5
6
7
8
Operating Manual EAV 34
+ NOTICE!
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
Print-no. 250 020 1
08/2009
If you do not swipe the transponder chip across the antenna for
a period of 5 seconds, the teach-in mode will be stopped. The reader unit
returns to operating mode.
Action Acoustic Signal U Result
Pass all the transponder nnnnn
Transponder chips
chips to be authorised in
succession over the antenna
for about 1 second „authorised“
Pass all the transponder no acoustic signal memory over (250 trans-
chips to be authorised in (no more transponder ponder chips have already
succession over the antenna chips can be authorised) been programmed)
Delete mode
Gesamt
Lösch-Karte
Delete-all card: Delete mode „All transponder
chips“ Ü Deletes all transponder
chips
CAUTION! By using the delete-all card all the transponder chips stored in the
system will be deleted! The action of deleting all transponder chips is irrevocable
once the process has been completed!
You have to teach up to 250 new transponder chips from the start!
The programming cards cannot open the door!
Action Acoustic Signal U Result
Pass the delete-all card nnnnn
end of delete mode
over the antenna
for about 1 second „All transponder chips“
+ NOTICE! All transponder chips have been deleted and the reader unit is at
delivery status. The delete-all card and the programming card are saved,
a transponder chip is not saved. In this state you cannot open the door via
transponder chip or card; rather you will have to re-progamm the transponder
chip.