SOLAR PV CONTROL SYSTEM.pdf

myservo.write(servov);
delay(50); //dealy for 50 ms before the next read
i=++i;
} while (i CP) digitalWrite(LED2, HIGH);
else if (y y) & (y < CP) & (x > CP)) { // check input voltage and voltage on battery
digitalWrite(charge_enable, HIGH); // turn on voltage to battery
chon = (CP - y) * 1000;
delay(chon); // ON wait
digitalWrite(charge_enable, LOW); // turn off charge enable
delay(choff); // OFF wait
} // end if
}
else
{
digitalWrite (swpin6v, HIGH);
digitalWrite (swpin8v, LOW);
digitalWrite (swpin10v, LOW);
digitalWrite (swpin12v, LOW);
delay (5000);
digitalWrite (swpin8v, HIGH);
digitalWrite (swpin6v, LOW);
digitalWrite (swpin10v, LOW);
digitalWrite (swpin12v, LOW);
Email: david.irungu@stu.kuct.ac.ke
69
2012