Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
wrench size required <strong>to</strong> fit the nut. Table 4-19 is the rec-<br />
ommended bolt <strong>to</strong>rque for clamp type connec<strong>to</strong>rs.<br />
API Ring Gaskets<br />
API ring gaskets type R, RX, and BX are used for<br />
flanges and clamp type connec<strong>to</strong>rs. The R and RX gas-<br />
kets are interchangeable and will fit ANSI flanges where<br />
applicable (Standard B-16.20, and API 6A). Uses for the<br />
different ring gaskets are shown in Figure 4-9.<br />
Types RX and BX provide a pressure energized seal<br />
but are not interchangeable.<br />
It is not recommended <strong>to</strong> reuse BX150 through BX160<br />
ring gaskets.<br />
Types:<br />
OVAL and OCTAGONAL. Designed for<br />
API Ring Joint Gaskets, these match<br />
standard and special grooves. K & W<br />
produces a wide selection of cus<strong>to</strong>m-<br />
designed and standard gaskets in<br />
these styles.<br />
BX and RX. Designed for extreme<br />
pressure service <strong>to</strong> 15,000 psi required in<br />
<strong>to</strong>day's oilfield drilling and production,<br />
these gaskets are pressure-actuated (the<br />
higher the contained pressure, the tighter<br />
the seal). The BX can be used only in API<br />
6 BX flanges. The RX is interchangeable<br />
with standard octagonal rings in<br />
API 6B flanges.<br />
COMBINATION. Designed for ring joints<br />
in which the mating flanges have<br />
different ring groove diameters.<br />
Figure 4-9. Types of API ring gaskets as manufactured by K&W, Inc. (Courtesy of<br />
K&W, Inc., a Standco Company.)<br />
101