Pocket Guide to Flan..

Figure 1-10. Cutaway of an orifice flange. (Courtesy of Taylor Forge.)
As illustrated in Figure 1-10, the orifice flange has
drilled and tapped outlets for installing the metering de-
vice (recorder).
Receiving Flanges
Materials Control
It is very important to carefully examine every flange
to verify that each conforms to the purchase order speci-
fications. It is equally important to check for damage to
the face and beveled end, and inspect the flanges for
corrosion. Report any damage or other discrepancies to
your supervisor or prepare an over, short, and damage
report (OS&D).
12