en Description B Color line sensor FE 5002

Color line sensor FE 5002
No. Name Default Min Max Unit Description
.2.6. • > dsp guiding mode 2 0 3 - Operating mode display
0 = no operating mode (must not occur)
1 = light line on dark background
2 = dark line on light background
3 = contrasting edge scanning
.2.7. lock guiding mode 0 0 1 - Operating mode locking
0 = no locking
1 = operating mode locked
Limitation: locking is only possible when addressing the
color line sensor as an edge sensor (x.1 or. x.2).
.2.8. reserve - - - - reserve
.2.9. > search range 3 0 3 - Search range limitations
mode 0 = no search range limitation
1 = search range limitation always active
2 = search range limitation only active in automatic
mode. Search range is extended to total sensor
measuring range if no guiding criterion is found in the
defined time (parameter 30) during automatic mode.
3 = Search range limitation active
Search range is extended to total sensor measuring
range if no guiding criterion is found in the defined
time (parameter 30) during automatic mode.
.3.0. full r. time 500 10 500 ms Time after loss of guiding criterion in which search range is
(x5 ms) extended to total sensor measuring range
.3.1. • calibration value 705 0 1350 - Sensor zero position calibration (for E+L service engineers
only)
.3.2. bright line tol. - - - - Parameter title
.3.3. bl width tolerance 20 1 100 % Line width tolerance for light lines
.3.4. bl bright tolerance 60 40 100 % Brightness tolerance for light lines
.3.5. bl contrast tol 35 1 100 % Brightness standardised contrast (SC) tolerance for light
lines
.3.6. > bl dsp comp. 0 0 1 - Brightness edge evaluation
mode 0 = edge evaluation ON
1 = edge evaluation OFF
.3.7. bl color tolerance 1,3 1,1 10 - Color tolerance for red/green and blue/green for light lines
.3.8. reserve - - - - reserve
.3.9. dark line tol. - - - - Parameter title
.4.0. dl width tolerance 20 1 100 % Line width tolerance for dark lines
.4.1. dl bright tolerance 60 40 100 % Brightness tolerance for dark lines
.4.2. dl contrast tol 35 1 100 % Brightness standardised contrast (SC) for dark lines
.4.3. > dl dsp comp. 0 0 1 - Brightness edge evaluation
mode 0 = edge evaluation ON
1 = edge evaluation OFF
.4.4. dl color 1,3 1,1 10 - Color tolerance for red/green and blue/green tolerance
for dark lines
.4.5. reserve - - - - reserve
B Page 16