SKF Reliability Systems - Library
SKF Reliability Systems - Library
SKF Reliability Systems - Library
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Condition Monitoring Equipment & Services<br />
The 2010 Listing of Condition Monitoring Equipment and Services was compiled by Len Bradshaw, June 2010.The data given is as received<br />
from the respondents. The AMMJ does not therefore accept any liability for actions taken as a result of information given in this survey.<br />
(Copyright to the Asset Management and Maintenance Journal)<br />
ALS Industrial Division<br />
Address: 109, Bannister Road, Canning<br />
Vale WA 6155 Australia<br />
Stephen.teo@alsglobal.com www.alsglobal.com<br />
CM PRODUCTS<br />
ALS Industrial Division supplies a range of vibration transducers, with<br />
customized cabling, data collection points, monitoring stations and on<br />
site installation, as required for a complete package.<br />
ALS Industrial Division also supplies custom designed on line<br />
systems for both short term and permanent monitoring of vibration<br />
and process parameters. These systems are supplied to client<br />
requirements together with on site installation, off site remote<br />
monitoring and analysis.<br />
CM SERVICES<br />
ALS Industrial Division has provided reliability and engineering<br />
services for over 30 years. Using a range of technologies, services are<br />
targeted at addressing equipment failure modes and aimed at overall<br />
reliability improvement. With offices around Australia, ALS Industrial<br />
Division is able to provide cost effective services nationally.<br />
Services provided include:<br />
• Develop, implement and / or Audit Condition Monitoring<br />
Programs as per ISO 17359<br />
• On site Training<br />
• Staff Leave Coverage and Technical Support to in house<br />
programs<br />
• Vibration Monitoring and Analysis<br />
• Infra-red Thermography of electrical, mechanical and process<br />
installations<br />
• Oil and Wear Debris Analysis<br />
• Vibration Acceptance Testing and Commissioning<br />
• Laser Alignment and in-situ Balancing<br />
• Bearing Inspection and Failure Investigation<br />
• Strain Gauging and Finite Element Analysis<br />
• Data logging and process monitoring<br />
• Fatigue Life Assessment<br />
• Structural Integrity Inspection<br />
• Classified Plant Inspection<br />
• Non Destructive Testing<br />
• Materials Consulting<br />
Alstom MSc<br />
Address: 27 Research Drv, Croydon Vic Australia<br />
sales.msc@sigenergy.com www.sigmamsc.com<br />
CM PRODUCTS<br />
Alstom MSc (formerly SigmaMSc) is a premium provider of machinery<br />
health monitoring solutions to industry. The unique benefit that<br />
we offer is an integrated package of leading technologies, expert<br />
consultancy skills, training and customer support. This means we<br />
can tailor solutions to meet the needs of our customers, ranging<br />
from fully outsourced monitoring services, through to the provision of<br />
portable and online systems complete with commissioning, training<br />
and support.<br />
In dealing with Alstom MSc, you can be assured we have the product<br />
range, technical know-how and resources to deliver and support a<br />
machinery health monitoring package that works for you.<br />
Our product range includes:<br />
PORTABLE VIBRATION MONITORING - VMI hand held vibration<br />
meters and analysers plus the world renowned range of Emerson CSi<br />
Machinery Health Analyzers with AMS Machinery Manager software.<br />
ONLINE VIBRATION MONITORING – Give your machines the best<br />
possible protection from failure with simple and low cost devices from<br />
Metrix, smart wireless monitoring systems and full turbine supervisory<br />
protection from Emerson.<br />
SENSORS – The extensive range of CTC accelerometers, cables<br />
and mounting hardware for monitoring online or inaccessible plant<br />
includes the PRO line of 4-20mA sensors for simple online monitoring<br />
and proximity probes for turbomachinery.<br />
IR THERMOGRAPHY- Low cost thermal imagers from IRISYS<br />
and advanced portable and online cameras from Thermoteknix.<br />
Applications include electrical panels, mechanical and refractory fault<br />
detection.<br />
LUBRICATION ANALYSIS PRODUCTS – Emerson CSI oil analysers<br />
and laboratory data management software and UVLM greasing<br />
monitoring devices.<br />
MEASUREMENT AND TEST PRODUCTS – Shaft laser alignment<br />
systems from KohTect and Emerson, new pulley and roll alignment<br />
systems from Seiffert Industrial, a complete range of ultrasonic<br />
thickness meters from Checkline, Ultrasonic fault detectors from EFI,<br />
strobes from Checkline and tachometers from Compact<br />
REMOTE VIEWING SCOPES: We have a comprehensive new range<br />
of industrial videoscopes for machinery inspections.<br />
CM SERVICES<br />
Alstom MSc has a 20 strong technical team, with experienced<br />
condition monitoring technicians and engineers in every mainland<br />
state providing a variety of technical services.<br />
TRAINING: We partner with the globally recognized Vibration Institute<br />
to offer their certification program, as well as a range of courses on<br />
CM other technologies.<br />
CUSTOMER SUPPORT: Our entire range of products is backed up<br />
by our dedicated direct support team.<br />
ROTOR DYNAMICS: Multichannel monitoring, troubleshooting and<br />
balancing on gas, steam, hydro and wind turbines.<br />
VIBRATION MONITORING: Routine vibration surveys, advanced<br />
troubleshooting and diagnostics.<br />
ALIGNMENT AND BALANCING: In-situ balancing, shaft alignment<br />
and pulley alignment.<br />
IR THERMOGRAPHY: Electrical, refractory and mechanical routine<br />
scanning and investigations.<br />
OIL ANALYSIS: Full range of laboratory tests for contamination<br />
detection, wear analysis and lubricant condition.<br />
CM PROGRAM ASSISTANCE: Database tailoring, mentoring,<br />
auditing.<br />
SYSTEM DESIGN COMMMISIONING: Online system commissioning,<br />
DCS integration, instrumentation testing.<br />
REMOTE MONITORING AND DIAGNOSTIC CENTRE (RMDC):<br />
Alstom MSc can remotely monitor your critical machines from our<br />
RMDC in Melbourne.<br />
apt Group (of Companies)<br />
(HO) Level 1, Suite 5, 13-15 Wentworth Ave,<br />
Sydney, NSW 2000. Australia<br />
info@aptgroup.com.au<br />
www.aptgroup.com.au<br />
CM PRODUCTS<br />
Portable/On-line Products<br />
The apt Group (of Companies) sell products incorporating advanced<br />
techniques and fast resolve/prediction to failure for Mechanical &<br />
Electrical plant diagnostics.<br />
Products suit large and small industrial plants, production critical and<br />
less critical machines, operator and service provider applications.<br />
Equipment