ClearPath Dorado 300/400/700/800/4000/4100/4200 Server I/O ...

More documents

Recommendations

Info

PCI-Based I/O Hardware Example Figure 1–13. Top View of the I/O Module The area in the ellipse shows the locations for IOP1 and the PCI card slots the IOP controls (more about the types of IOPs and PCI cards later). The area in the ellipse is set up at the factory with an SIOP in PCI slot 0 and a DVD Interface Card in PCI slot 1. Due to cable length limitations, this location must be used for the DVD interface since it is closest to the DVD reader. (For more information on DVD, see 1.6.2.) The other PCI slot, slot 0, can be used for an SIOP, an HBA, or a PCI Host Bridge Card to an expansion rack. The following figure shows IOPs in an I/O Module. • The CIOP controls two NICs. • One SIOP has two HBAs. • One SIOP has an interface to a DVD and a PCI Host Bridge Card to two fibre HBAs in an expansion rack. Notes: • CIOP is not supported on Dorado 400. • This example does not apply to the Dorado 4000, 4100 or 4200. See Figures 1– 14, 1–15, 1–16, and 1–17 for the Dorado 4000 and 4100 connections. 1–20 3839 6586–010
Figure 1–14. I/O Module Connection to Expansion Racks PCI-Based I/O Hardware 1.3.2. I/O Module (Internal or External) for the Dorado 700 The Internal I/O Module consists of five slots. There is room for four IOPs; each IOP can control a maximum of seven PCI slots in the PCI Expansion Rack. Figure 1–15. Internal I/O Module Layout for the Dorado 700 3839 6586–010 1–21
Page 1 and 2: ClearPath Dorado 300/400/700/800/40
Page 3 and 4: Contents Section 1. PCI-Based I/O H
Page 5 and 6: Section 4. Tapes Contents 3.2.5. St
Page 7 and 8: Contents 6.6.5. Multihost or Multip
Page 9 and 10: Appendix D. Requesting Configuratio
Page 11 and 12: Figures 1-1. Dorado 300 Series Cabi
Page 13 and 14: Figures 5-5. SIOP: Dorado 700 I/Os
Page 15 and 16: Tables 1-1. Dorado 800 I/O Styles .
Page 17 and 18: Tables B-1. Brocade Switch Addresse
Page 19 and 20: Section 1 PCI-Based I/O Hardware Th
Page 21 and 22: Dorado 780 and Dorado 790 PCI-Based
Page 23 and 24: PCI-Based I/O Hardware Figure 1-3.
Page 25 and 26: 1.1.5. Dorado 4000 Server Figure 1-
Page 27 and 28: The following illustration shows th
Page 29 and 30: • Cavium Nitrox (Encryption) card
Page 31 and 32: PCI-Based I/O Hardware The followin
Page 33 and 34: PCI-Based I/O Hardware • ASIC An
Page 35 and 36: Styles The following are the IOP ca
Page 37: PCI-Based I/O Hardware A network in
Page 41 and 42: In this example, • The CIOP contr
Page 43 and 44: PCI-Based I/O Hardware The personal
Page 45 and 46: 1.3.5. I/O Expansion Module for the
Page 47 and 48: PCI-Based I/O Hardware The Dorado 4
Page 49 and 50: PCI-Based I/O Hardware Once the max
Page 51 and 52: PCI-Based I/O Hardware • The orde
Page 53 and 54: Figure 1-25. OS 2200 I/O Addressing
Page 55 and 56: PCI-Based I/O Hardware 3. If you cl
Page 57 and 58: LED Status Style 1.4.2. SCSI The fo
Page 59 and 60: LED Status Style There are no LED i
Page 61 and 62: Style The following table lists the
Page 63 and 64: The following is a picture of the B
Page 65 and 66: PCI-Based I/O Hardware Gigabit Ethe
Page 67 and 68: Table 1-12. Ethernet Styles Style D
Page 69 and 70: • Off No link. • Yellow flashin
Page 71 and 72: LED Status for Each Port Figure 1-3
Page 73 and 74: Figure 1-35. IDE Cable Connection o
Page 75 and 76: Style LED Status The following tabl
Page 77 and 78: Time Distribution PCI-Based I/O Har
Page 79 and 80: 1.6.4. Cipher API Hardware Accelera
Page 81 and 82: Section 2 Channel Configurations Th
Page 83 and 84: Channel Configurations depending on
Page 85 and 86: Table 2-2. SCMS II View of JBOD Con
Page 87 and 88: Channel Configurations − You shou
Page 89 and 90:
Channel Configurations This example
Page 91 and 92:
Channel Configurations For sites wa
Page 93 and 94:
Channel Configurations Figure 2-7.
Page 95 and 96:
Channel Channel Configurations Tabl
Page 97 and 98:
The following are some of the guide
Page 99 and 100:
SCMS II View Channel Configurations
Page 101 and 102:
Channel Configurations The port add
Page 103 and 104:
Zones Channel Configurations You sh
Page 105 and 106:
SCMS II Configuration Channel Confi
Page 107 and 108:
Channel Configurations The followin
Page 109 and 110:
Channel Configurations Characterist
Page 111 and 112:
Channel Configurations • There ca
Page 113 and 114:
Channel Configurations The assignme
Page 115 and 116:
Channel Configurations Table 2-12.
Page 117 and 118:
Each tape controller must be in a u
Page 119 and 120:
Resiliency and Connectivity When pl
Page 121 and 122:
Establishing Dedicated Connections
Page 123 and 124:
• EMC Centera and Celera firmware
Page 125 and 126:
Notes: Channel Configurations 1. If
Page 127 and 128:
Section 3 Mass Storage The OS 2200
Page 129 and 130:
Figure 3-1. OS 2200 Architecture Su
Page 131 and 132:
3.2.2. Disk Queuing (Not Using I/O
Page 133 and 134:
Performance Enabling IOCQ Mass Stor
Page 135 and 136:
Mass Storage The following figure i
Page 137 and 138:
Figure 3-8. Multiple Channel Contro
Page 139 and 140:
3.3.2. 504 Bytes per Sector Mass St
Page 141 and 142:
On a read Mass Storage • If the d
Page 143 and 144:
3.5. Disk Performance Mass Storage
Page 145 and 146:
Response time is related to through
Page 147 and 148:
Controller Overhead Time Mass Stora
Page 149 and 150:
Hardware Service Time Figure 3-13.
Page 151 and 152:
3.5.4. Little’s Law Mass Storage
Page 153 and 154:
3.5.5. Request Existence Time Figur
Page 155 and 156:
Comparable I/O Transfers Have Compa
Page 157 and 158:
Figure 3-19. Synchronous Mode Mass
Page 159 and 160:
3.6.5. SRDF Synchronous Mode Time D
Page 161 and 162:
Section 4 Tapes This section is an
Page 163 and 164:
• 9840D Almost twice the capacity
Page 165 and 166:
Data Restoration Tapes Possibly the
Page 167 and 168:
Tapes This type of head movement is
Page 169 and 170:
Tapes For most I/O requests, acknow
Page 171 and 172:
Example Two EOFs in a row signify t
Page 173 and 174:
Tapes Prior to the introduction of
Page 175 and 176:
Table 4-4. Translation of Tracks to
Page 177 and 178:
Tapes The added risk of Phase 2 is
Page 179 and 180:
Exec IRU Tapes The Exec and IRU hav
Page 181 and 182:
Tapes The recommended audit trail f
Page 183 and 184:
FAS Tapes • The IRU MOVE command
Page 185 and 186:
The following table shows the block
Page 187 and 188:
4.6.1. Electronic Partitioning on F
Page 189 and 190:
Section 5 Performance This section
Page 191 and 192:
Performance When calculating the nu
Page 193 and 194:
Figure 5-3. Dorado 800 and Dorado 4
Page 195 and 196:
N1=1, N2=2, P=2 25% = 100/1/2/2 The
Page 197 and 198:
Performance There is an easy way to
Page 199 and 200:
Performance • When measuring chan
Page 201 and 202:
5.2.1. SIOP Performance Performance
Page 203 and 204:
Figure 5-8. SIOP: Dorado 300 MB per
Page 205 and 206:
Figure 5-13. Dorado 4200 I/O Manage
Page 207 and 208:
Figure 5-16. Dorado 4200 Single Por
Page 209 and 210:
Performance Figure 5-20. Dorado 800
Page 211 and 212:
Performance A rate of 60 MB per sec
Page 213 and 214:
Figure 5-27. Multiple Drive SIOP FI
Page 215 and 216:
A single Ethernet NIC can support t
Page 217 and 218:
For tape and disk Performance • U
Page 219 and 220:
Section 6 Storage Area Networks Sto
Page 221 and 222:
Storage Area Networks Loop topology
Page 223 and 224:
Nodes and Ports Figure 6-2. Switche
Page 225 and 226:
6.3. Switches Storage Area Networks
Page 227 and 228:
Storage Area Networks JBOD devices
Page 229 and 230:
Storage Area Networks Note: The Dom
Page 231 and 232:
Some examples of devices converted
Page 233 and 234:
Device in the Example Table 6-4. 12
Page 235 and 236:
6.6. Zoning Storage Area Networks A
Page 237 and 238:
6.6.4. Zoning with Multiple Switche
Page 239 and 240:
6.6.6. Remote Backup Zoning Storage
Page 241 and 242:
Section 7 Peripheral Systems This s
Page 243 and 244:
Restrictions Peripheral Systems •
Page 245 and 246:
OS 2200 Implementation The followin
Page 247 and 248:
Peripheral Systems The low density
Page 249 and 250:
Peripheral Systems Table 7-1. Suppo
Page 251 and 252:
Peripheral Systems • The followin
Page 253 and 254:
Cautions Peripheral Systems • Do
Page 255 and 256:
Peripheral Systems • An LED indic
Page 257 and 258:
Peripheral Systems • An LED indic
Page 259 and 260:
The assign mnemonic for the T98840B
Page 261 and 262:
Caution Peripheral Systems All DLT
Page 263 and 264:
7.1.13. OST4890 Cartridge Periphera
Page 265 and 266:
7.2.3. CLU5500 Peripheral Systems T
Page 267 and 268:
7.3.2. Symmetrix DMX Series Periphe
Page 269 and 270:
Symmetrix 4.0 Peripheral Systems Th
Page 271 and 272:
Peripheral Systems Note: When chang
Page 273 and 274:
7.4.3. LUNs Figure 7-1. Unit Duplex
Page 275 and 276:
Peripheral Systems Table 7-10 shows
Page 277 and 278:
7.5. Just a Bunch of Disks (JBOD) P
Page 279 and 280:
Section 8 Cabling 8.1. SCSI This se
Page 281 and 282:
y the system, except to achieve ext
Page 283 and 284:
Figure 8-3. SBCON Cable or Connecto
Page 285 and 286:
Cabling A few examples of the use o
Page 287 and 288:
8.5.2. Communications IOP (CIOP) No
Page 289 and 290:
Section 9 Peripheral Migration The
Page 291 and 292:
9.3.3. Read-Backward Functions Peri
Page 293 and 294:
Model Description DSI-9XX3 VTL 2.1
Page 295 and 296:
9.4.3. End-of-Life Tape Libraries P
Page 297 and 298:
Disks Description Table 9-6. Suppor
Page 299 and 300:
RAID Disk Table 9-7. Supported SAIL
Page 301 and 302:
9.5.6. SAIL Host Bus Adapters (HBAs
Page 303 and 304:
Table 9-11. SIOP Device Mnemonics (
Page 305 and 306:
DLT 7000, DLT8000 CTS5236, CTS5236E
Page 307 and 308:
9.7.3. HLC Peripheral Migration The
Page 309 and 310:
9.9. Other Migration Issues The fol
Page 311 and 312:
Appendix A Fibre Channel Addresses
Page 313 and 314:
Table A-1. Allowed Positions on an
Page 315 and 316:
Table A-1. Allowed Positions on an
Page 317 and 318:
Appendix B Fabric Addresses The fol
Page 319 and 320:
Port Location (dec) Table B-1. Broc
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
The following table lists older mod
Page 327 and 328:
Table B-2. Older Model McData Switc
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Table B-3. Newer Model McData Switc
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Appendix C Key Hardware Enhancement
Page 343 and 344:
Appendix D Requesting Configuration
Page 345 and 346:
Index A access time, 3-20, 3-21 ACS
Page 347 and 348:
queue, 3-19 Request Existence Time,
Page 349 and 350:
R read backward, 4-5 Request Existe
Page 351 and 352:
FICON, 2-45 throughput, definition,
Page 354:
*38396586-010* 3839 6586-010
show all

ClearPath Dorado 300/400/700/800/4000/4100/4200 Server I/O ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?