P4080 PCIe Adapter SDK User Guide Production Release
P4080 PCIe Adapter SDK User Guide Production Release
P4080 PCIe Adapter SDK User Guide Production Release
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Freescale Semiconductor<br />
Select “Freescale <strong>P4080</strong> PowerPC platform N710 EP” on second screen for Endpoint mode<br />
BSP or select “Freescale <strong>P4080</strong> PowerPC platform N710 RC” for Root Complex mode<br />
BSP, save and exit. Third screen will be displayed corresponding RC/EP mode<br />
configuration.<br />
Screen 3<br />
Exit from the third screen and save the configuration when it prompts.<br />
In case if any of the configuration screens are not displayed as mentioned above, use the<br />
following commands.<br />
o $ ./ltib –m clean<br />
o $ ./ltib –m distclean<br />
o $ ./ltib –m config<br />
After getting the configuration screens, follow the above mentioned steps to change and<br />
save the configuration.<br />
x86 Device Drivers<br />
Go to x86 device drivers directory:<br />
© Freescale Semiconductor, Inc., 2011. All rights reserved.<br />
Freescale Confidential Proprietary Page 31
Change language