ACO6800+ Installation and Operation Manual - Biznine.com

Table 1-2. Generic 6800+ Module Features
Feature Description
Module status
LEDs
Mode select
rotary switch
Navigation
toggle switch
Chapter 1: Introduction
Various color and lighting combinations of these LEDs indicate the
module state. See page 45, page 59, page 73, and page 98 for more
information.
This switch selects between various control and feedback
parameters.
This switch navigates up and down through the available control
parameters:
• Down: Moves down through the parameters
• Up: Moves up through the parameters
Control LEDs Various lighting combinations of these Control LEDs (sometimes
referred to as “Bank Select LEDs”) indicate the currently selected
bank. See “Bank Select LEDs” on page 21 for more information.
Monitoring
LEDs
Each 6800+ module has a number of LEDs assigned to indicate
varying states/functions. See page 46, page 60, page 74, and
page 99 for descriptions of these LEDs.
Jumpers This module has Remote/Local jumper, for selecting either local or
remote control of the module (default is Remote). The BSCAN/
Normal jumper must be left in the Normal position.
ACO6800+ Installation and Operation Manual 5
Copyright © 2009, Harris Corporation