ACO6800+ Installation and Operation Manual - Biznine.com
ACO6800+ Installation and Operation Manual - Biznine.com
ACO6800+ Installation and Operation Manual - Biznine.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Upgrading Module Firmware<br />
Chapter 2: <strong>Installation</strong><br />
Firmware upgrading is a routine procedure that you must perform to install newer<br />
versions of software on 6800+ modules. Navigator software version 4.4 or later is<br />
required to perform this procedure on <strong>ACO6800+</strong> modules. The frame must<br />
contain or be connected to another frame that contains an ICE6800+ or a<br />
6800+ETH module, version 4.1 or higher.<br />
You can upgrade your 6800+ module’s firmware using the Software Upgrade tool<br />
in CCS Navigator 4.4 or higher. See your frame manual for more information.<br />
Caution<br />
The File Transfer tab is not meant to be used for firmware upgrades. Use the<br />
Software Upgrade tool to upgrade module firmware.<br />
If you do not use the correct firmware version, your module may display incorrect<br />
menu structures, thumbnail failures, <strong>and</strong> software upgrade failures.<br />
Note<br />
The module uses high-speed upgrading in ASI mode, <strong>and</strong> normal field<br />
upgrading in SDI mode.<br />
<strong>ACO6800+</strong> <strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> <strong>Manual</strong> 15<br />
Copyright © 2009, Harris Corporation