03.08.2013 Views

Magellan Control Panels Installation and Operation ... - Biznine.com

Magellan Control Panels Installation and Operation ... - Biznine.com

Magellan Control Panels Installation and Operation ... - Biznine.com

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3 Configuration<br />

Before the control panel can operate as part of your routing system, you must unpack,<br />

install, <strong>and</strong> configure <strong>com</strong>ponents. This chapter covers those topics specific to panel<br />

configuration.<br />

<strong>Magellan</strong> control panels may be configured using the software configuration tool supplied<br />

with the panel. Configuration procedures may be performed either offline (for later import)<br />

or online (for a panel that is already installed in a routing setup). Except as noted,<br />

configuration procedures are the same when performed offline or online. See Using the<br />

Software Configuration Tool for more information.<br />

The web configuration is optimized for use with monitors having screen resolutions of<br />

1280×1024 pixels; however larger resolutions will allow better visibility of panels with more<br />

buttons.<br />

Some configuration functions for the -LCD <strong>and</strong> -OLED panels may also be performed<br />

directly at the front panel. See Configuring <strong>Panels</strong> at the Front Panel for more<br />

information.<br />

<strong>Panels</strong> are configured via a web browser to a connected panel over TCP/IP. Once configured,<br />

the <strong>Magellan</strong> control panel retains its programming even if powered down.<br />

For more information about downloading panels in Navigator, see the CCS Navigator User<br />

Manual, Volume 6: Routing Components.<br />

Copyright © 2010, Harris Corporation<br />

27

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!