Athena System Manual - Premio, Inc.
Athena System Manual - Premio, Inc.
Athena System Manual - Premio, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KT3 Ultra2-C ATX Mainboard<br />
MS-6592 ATX Mainboard<br />
D-Bracket 2 (Optional)<br />
D-Bracket 2 is a USB bracket integrating four Diagnostic LEDs, which<br />
use graphic signal display to help users understand their system. The LEDs<br />
provide up to 16 combinations of signals to debug the system. The 4 LEDs can<br />
detect all problems that fail the system, such as VGA, RAM or other failures.<br />
This special feature is very useful for overclocking users. These users can use<br />
the feature to detect if there are any problems or failures. D-Bracket 2 supports<br />
both USB 1.1 & 2.0 spec.<br />
1-8<br />
D-Bracket 2 for mainboard with bluetooth<br />
connector (1 port)<br />
1 2<br />
D-Bracket 2 for mainboard without<br />
bluetooth connector (2 ports)<br />
D-Bracket 2 Description<br />
<strong>System</strong> Power ON<br />
3 4<br />
- The D-LED will hang here if the processor is damaged or<br />
not installed properly.<br />
Early Chipset Initialization<br />
Memory Detection Test<br />
- Testing onboard memory size. The D-LED will hang if the<br />
memory module is damaged or not installed properly.<br />
Decompressing BIOS image to RAM for fast booting.<br />
Initializing Keyboard Controller.<br />
Testing VGA BIOS<br />
- This will start writing VGA sign-on message to the screen.