Aprilia Scarabeo 4T servicemanual - Scootergrisen
Aprilia Scarabeo 4T servicemanual - Scootergrisen
Aprilia Scarabeo 4T servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
REAR SUSPENSION<br />
REMOVAL<br />
Carefully read p. 2 (GENERAL SAFETY RULES).<br />
♦ Place the vehicle on the center stand.<br />
Put a proper spacer (X) under the rear wheel to<br />
prevent it from falling and pushing the air cleaner<br />
casing into the frame.<br />
♦ Remove the rear part of the fairing, see p.22 (REMOVING<br />
THE REAR PART OF THE FAIRING).<br />
Support the rear part of the frame to prevent it from<br />
dropping during the removal of the shock absorber.<br />
♦ Remove the upper screw (1) and washer.<br />
Upper screw tightening torque: 50 Nm (36.17 ftlb).<br />
♦ Remove the lower screw (2) and washer.<br />
Lower screw tightening torque: 25 Nm (18.08 ftlb).<br />
♦ Remove the shock absorber (3).<br />
EXHAUST SILENCER<br />
DISASSEMBLY<br />
CAUTION<br />
WARNING<br />
Carefully read p. 2 (GENERAL SAFETY RULES).<br />
♦ Place the vehicle on the center stand.<br />
WARNING<br />
Before carrying out the following operations, let the<br />
engine and the exhaust silencer cool down until they<br />
reach room temperature, in order to avoid burns.<br />
1<br />
100<br />
Release 00 2003-02<br />
1<br />
4<br />
3<br />
5<br />
<strong>Scarabeo</strong> 50 I.E.-50/100 <strong>4T</strong><br />
3<br />
2<br />
2<br />
6<br />
X<br />
69