Field Logger 512 k User Manual - Temperatur-Shop

More documents

Recommendations

Info

8. Windows will complain that it can not verify the editor of this driver. Confirm to install anyway! 9. A message indicating successful installation will display. 10. Returning to the Device Manager screen, you can check which virtual serial port is allocated to the FieldLogger. NOVUS AUTOMATION www.bubthermo.de www.fieldlogger.net 19/84 20
DEFINITION AND SELECTION OF SERIAL PORT (COM) - WINDOWS The serial port associated with FieldLogger is automatically defined by the operating system a few moments after connecting the FieldLogger. The user can easily identify or change the COM port associated with FieldLogger: Control Panel / System / Hardware / Device Manager / COM & LPT Ports Select the device "USB Serial Port" corresponding to the FieldLogger and click on "Properties". Select "Port Settings" guide and click on "Advanced". In the "COM Port Number", select the serial port to be associated with FieldLogger. Some serial ports can be checked while being used (In Use). Just select one of these ports if you know that it is not being used by another peripheral device on your computer. In some cases, the serial ports can be checked as in use even when the associated device is no longer installed on your computer. In this case it is safe to associate this port to FieldLogger. The following figure presents the view of the device manager containing a FieldLogger, and the screens where the property screens where you can reset the associated COM port. NOVUS AUTOMATION www.bubthermo.de www.fieldlogger.net 20/84 21
Page 1 and 2: Field Logger 512 k User Manual
Page 3 and 4: NETWORK MANAGEMENT - SNMP .........
Page 5 and 6: CONNECTIONS AND INSTALLATION MECHAN
Page 7 and 8: Dimensions: Without HMI module: Fig
Page 9 and 10: ATTACHING AND DETACHING THE FRONT C
Page 11 and 12: ELECTRICAL CONNECTIONS Fig. 13 - Fi
Page 13 and 14: Slave AUXILIAR POWER SUPPLY FOR POW
Page 15 and 16: CONNECTIVITY RESOURCES USB Connecti
Page 17 and 18: INSTALLING THE USB DRIVER When inst
Page 19: 5. Ask to "Browse my computer for d
Page 23 and 24: CONFIGURATION On the configuration
Page 25 and 26: GENERAL CONFIGURATIONS The first sc
Page 27 and 28: ETHERNET INTERFACE CONFIGURATION Th
Page 29 and 30: ETHERNET INTERFACE CONFIGURATION -
Page 35 and 36: Analog Channels - Configuration of
Page 37 and 38: DIGITAL CHANNELS CONFIGURATION Afte
Page 39 and 40: REMOTE CHANNELS CONFIGURATION The c
Page 41 and 42: At the bottom of the screen there a
Page 43 and 44: ALARMS CONFIGURATION After setting
Page 45 and 46: Alarms Configuration - E-mail recei
Page 47 and 48: LOGS CONFIGURATION The last page of
Page 49 and 50: DIAGNOSTICS When you select the Dia
Page 51 and 52: Selecting the Alarms tab, you can c
Page 53 and 54: The Downloads Manager screen has th
Page 55 and 56: Once the data communication with th
Page 57 and 58: You must choose, through the respec
Page 59 and 60: To export the selected data, you mu
Page 61 and 62: FIELDLOGGER OPERATION ANALOG INPUTS
Page 63 and 64: OUTPUT RELAYS FieldLogger has two r
Page 65 and 66: USB DEVICE The USB interface device
Page 67 and 68: FILE TRANSFER - FTP Fig. 24 - Confi
Page 69 and 70: Traps Traps will be generated if en
Page 71 and 72:
Modbus commands to start and stop l
Page 73 and 74:
HMI (HUMAN-MACHINE INTERFACE) The H
Page 75 and 76:
Navigation between the screens is a
Page 77 and 78:
The available parameters of this sc
Page 79 and 80:
3. Replace the plug and powering co
Page 81 and 82:
CLOCK BATTERY REPLACEMENT FieldLogg
Page 83 and 84:
SPECIFICATIONS Power: 100 to 240 Va
Page 85 and 86:
Notes www.bubthermo.de 85
show all

Field Logger 512 k User Manual - Temperatur-Shop

Create successful ePaper yourself

Delete template?

Save as template?