Field Logger 512 k User Manual - Temperatur-Shop

More documents

Recommendations

Info

Selecting the Chart tab, you can select up to 6 channels to be viewed in a chart. At the bottom, you can select the channel to be displayed and its associated color on the chart. When all desired channels are selected, you must click on the "Start" button and the channel values will be read every 2 seconds (approximately) and will be plotted on the chart. If any channel is in error, the channel selection will be shown in red. Diagnostics - Monitoring channels NOVUS AUTOMATION www.bubthermo.de www.fieldlogger.net 49/84 50
Selecting the Alarms tab, you can check the real-time status of all configured alarms. At the top, there is an indication of how many alarms are enabled and how many are in a state of alarm. In the list below, the settings for each alarm are shown. If the alarm is active, its configuration is shown in red. Diagnostics - Monitoring Alarms NOVUS AUTOMATION www.bubthermo.de www.fieldlogger.net 50/84 51
Page 1 and 2: Field Logger 512 k User Manual
Page 3 and 4: NETWORK MANAGEMENT - SNMP .........
Page 5 and 6: CONNECTIONS AND INSTALLATION MECHAN
Page 7 and 8: Dimensions: Without HMI module: Fig
Page 9 and 10: ATTACHING AND DETACHING THE FRONT C
Page 11 and 12: ELECTRICAL CONNECTIONS Fig. 13 - Fi
Page 13 and 14: Slave AUXILIAR POWER SUPPLY FOR POW
Page 15 and 16: CONNECTIVITY RESOURCES USB Connecti
Page 17 and 18: INSTALLING THE USB DRIVER When inst
Page 19 and 20: 5. Ask to "Browse my computer for d
Page 21 and 22: DEFINITION AND SELECTION OF SERIAL
Page 23 and 24: CONFIGURATION On the configuration
Page 25 and 26: GENERAL CONFIGURATIONS The first sc
Page 27 and 28: ETHERNET INTERFACE CONFIGURATION Th
Page 29 and 30: ETHERNET INTERFACE CONFIGURATION -
Page 35 and 36: Analog Channels - Configuration of
Page 37 and 38: DIGITAL CHANNELS CONFIGURATION Afte
Page 39 and 40: REMOTE CHANNELS CONFIGURATION The c
Page 41 and 42: At the bottom of the screen there a
Page 43 and 44: ALARMS CONFIGURATION After setting
Page 45 and 46: Alarms Configuration - E-mail recei
Page 47 and 48: LOGS CONFIGURATION The last page of
Page 49: DIAGNOSTICS When you select the Dia
Page 53 and 54: The Downloads Manager screen has th
Page 55 and 56: Once the data communication with th
Page 57 and 58: You must choose, through the respec
Page 59 and 60: To export the selected data, you mu
Page 61 and 62: FIELDLOGGER OPERATION ANALOG INPUTS
Page 63 and 64: OUTPUT RELAYS FieldLogger has two r
Page 65 and 66: USB DEVICE The USB interface device
Page 67 and 68: FILE TRANSFER - FTP Fig. 24 - Confi
Page 69 and 70: Traps Traps will be generated if en
Page 71 and 72: Modbus commands to start and stop l
Page 73 and 74: HMI (HUMAN-MACHINE INTERFACE) The H
Page 75 and 76: Navigation between the screens is a
Page 77 and 78: The available parameters of this sc
Page 79 and 80: 3. Replace the plug and powering co
Page 81 and 82: CLOCK BATTERY REPLACEMENT FieldLogg
Page 83 and 84: SPECIFICATIONS Power: 100 to 240 Va
Page 85 and 86: Notes www.bubthermo.de 85

Field Logger 512 k User Manual - Temperatur-Shop

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?