You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Underview example of locking turnbuckle<br />
board. Note full brake detail on this car.<br />
(C&S cinder car)<br />
Test fit trucks to check clearances from<br />
truss rods.<br />
Inner rods may need to be bent slightly to<br />
increase clearance, if required.<br />
Turn your car over onto its test trucks and<br />
check clearances with the car mounted on<br />
a section of track. Using a small knife<br />
blade or file, cut a section of the decking<br />
away from the stake pockets, as shown in<br />
the photo above. This will allow stakes to<br />
be installed in the pockets, if required.<br />
Normal stakes are usually 4”x4” posts,<br />
tapered at the base.