UBI EasyCoder 401 ? Technical Manual CONTENTS

UBI EasyCoder 401 – Technical Manual
SETUP PARAMETERS, cont'd.
Print Window:
Printhead in left-hand position
Dot-line
on printhead
Dot 0
Length
Origo
X-start Width
The printhead can be fitted in two positions (see chapter “Printhead
Replacement”). When the printhead is fitted in the innermost, lefthand
position (see illustration), dot No. 0 is aligned with the inner
edge of the paper web. Since the maximum print width is 104 mm
(4.1") and the maximum web width is 120 mm (4.7"), this leaves a
margin of at least 16 mm (0.6") along the outer edge of the web,
where no printing can be performed.
From
paper supply
104 mm (4.1")
PRINT PRINT
WINDOW WINDOW
PAPER FEED
DIRECTION
max. 120 mm (4.7")
16 mm (0.63")
Dot 831
Continued!
20