UBI EasyCoder 401 ? Technical Manual CONTENTS
UBI EasyCoder 401 ? Technical Manual CONTENTS
UBI EasyCoder 401 ? Technical Manual CONTENTS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>UBI</strong> <strong>EasyCoder</strong> <strong>401</strong> – <strong>Technical</strong> <strong>Manual</strong><br />
PRINTHEAD REPLACEMENT, cont'd.<br />
Step-by-Step Instructions,<br />
cont'd.<br />
Slot<br />
Guide Screw<br />
(l-h position)<br />
Printhead prepared to be fitted in lefthand<br />
position. Compare position of guide<br />
screw with illustration on previous page.<br />
❑ If you want to change the position of the printhead, move the<br />
#T20 Torx guide screw to its alternative position as illustrated to<br />
the left.<br />
❑ Connect the two cables to the printhead.<br />
❑ Fit the replacement printhead assembly back into the bracket,<br />
making sure that the guide screw fits into its slot and that the rear<br />
part of the assembly is held by the two lugs on the bracket. You<br />
can switch between different printhead densities at will.<br />
❑ Turn the locking handle clockwise to locked position.<br />
❑ Put back the transfer ribbon, if any. Check that the printhead<br />
cables do not interfere with the ribbon.<br />
❑ Lower the printhead.<br />
❑ Turn on the power. At power-up, the printer will automatically<br />
reset itself to the characteristics of the printhead in regard of head<br />
resistance and density.<br />
❑ Close the front hatch and right-hand door and the printer is ready<br />
for operation.<br />
50