UBI EasyCoder 401 ? Technical Manual CONTENTS
UBI EasyCoder 401 ? Technical Manual CONTENTS
UBI EasyCoder 401 ? Technical Manual CONTENTS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>UBI</strong> <strong>EasyCoder</strong> <strong>401</strong> – <strong>Technical</strong> <strong>Manual</strong><br />
PRINTING PRINCIPLES, cont'd.<br />
Printing Adjustments,<br />
cont'd.<br />
Printhead Pressure, cont'd:<br />
The required pressure may vary between printing methods and face<br />
materials of different thickness. Direct thermal printing may require<br />
more pressure than thermal transfer printing, and thicker face<br />
materials require more pressure than thinner.<br />
Make a rough adjustment like this:<br />
• Turn both adjustment knobs clockwise as far as they go to<br />
maximum pressure.<br />
• Release the pressure of the inner spring package by turning the<br />
knob 2 1 /4 turns counter-clockwise (9 clicks).<br />
• Release the pressure of the outer spring package by turning the<br />
knob 2 turns counter-clockwise (8 clicks).<br />
Fine-adjust the pressure by turning the outer knob, while retaining<br />
the setting of the inner knob. If the desired result cannot be obtained,<br />
increase or decrease the pressure by turning both knobs a quarter of<br />
a turn in the same direction, then fine-adjust the outer knob.<br />
28