UBI EasyCoder 401 ? Technical Manual CONTENTS
UBI EasyCoder 401 ? Technical Manual CONTENTS
UBI EasyCoder 401 ? Technical Manual CONTENTS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PAPER CUTTER<br />
General Information<br />
<strong>UBI</strong> <strong>EasyCoder</strong> <strong>401</strong> – <strong>Technical</strong> <strong>Manual</strong><br />
CAUTION!<br />
The cutting edge will rotate when<br />
the power is turned on and when<br />
the printer is rebooted.<br />
Always keep the cutter unit in<br />
closed position during operation.<br />
The <strong>EasyCoder</strong> <strong>401</strong> can easily be fitted with an optional Paper<br />
Cutter, provided the printer is not also equipped with a label-taken<br />
sensor (LTS). The cutter unit is fitted on the same hinges as the front<br />
door, which it replaces, and is connected by a single cable to the<br />
DIN-connector on the printer's front.<br />
The Paper Cutter is available both as a factory-installed option and<br />
as an upgrading kit.<br />
Power Ready Error<br />
<strong>EasyCoder</strong> <strong>401</strong><br />
Print<br />
The Paper Cutter is intended to cut through continuous nonadhesive<br />
paper strip or through the backing paper between labels.<br />
It must not be used to cut through any kind of adhesive, which would<br />
stick to the cutting parts and rapidly render the cutter inoperable –<br />
possibly also causing damage to the electric motor.<br />
Maximum paper thickness is 175 μm (≈ 175 grammes/m2 ) for<br />
normal paper-based materials.<br />
The Paper Cutter increases the printer's total weight by approx. 1.0<br />
kgs (=2.2 lbs) and its length by 28 mm (1.1").<br />
Continued!<br />
44
Change language