Installation of Fixed Capacitive HSWIM Sensors
Installation of Fixed Capacitive HSWIM Sensors
Installation of Fixed Capacitive HSWIM Sensors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Document status<br />
Document title: <strong>Installation</strong> <strong>of</strong> <strong>Fixed</strong> <strong>Capacitive</strong> <strong>HSWIM</strong> <strong>Sensors</strong><br />
Document type: Instruction Manual<br />
Document number: MS001-96100-52<br />
Summary: <strong>Installation</strong> instruction for the Mikros Systems capacitive High Speed Weighing In<br />
Motion (<strong>HSWIM</strong>) sensors.<br />
Author: JRS<br />
© Copyright <strong>of</strong> this material remains with Mikros Systems.<br />
Issue Issue date Approved by Purpose <strong>of</strong> revision<br />
4 9 Dec 1998 JBRO Last <strong>of</strong> old document before name change<br />
5 1 Mar 2005 CS Name change to accommodate separate<br />
installation instructions for loops, capacitive<br />
WIM sensors and axle detectors.<br />
Mikros Systems contact details<br />
P.O. Box 75034<br />
Lynnwood Ridge<br />
0040<br />
South Africa<br />
www.mikros.co.za<br />
e-mail: mikros@mikros.co.za<br />
Disclaimer<br />
All statements, technical information and recommendations contained in this document are<br />
based on tests and good practices that Mikros Systems believes to be relevant. The accuracy<br />
and completeness there<strong>of</strong> is not guaranteed.<br />
Mikros Systems shall not be liable in contract or in tort for any incidental, special, or<br />
consequential damages relating to the information (or use <strong>of</strong> information) contained in this<br />
document.<br />
MS001-96100-52 <strong>Installation</strong> <strong>of</strong> <strong>Fixed</strong> <strong>Capacitive</strong> <strong>HSWIM</strong> <strong>Sensors</strong> Issue5 1 March 2005<br />
2 / 56
Change language