Installation of Fixed Capacitive HSWIM Sensors

More documents

Recommendations

Info

Annexure E: Additional sample documentation Note: These are additional documentation to loop installations as described in that document. All the documentation for loop installations must also be completed. (Installation of Loops for Traffic Data Logging Station MS001-96200-52) MS001-96100-52 Installation of Fixed Capacitive HSWIM Sensors Issue5 1 March 2005 46 / 56
Table 4b: TEL site Capacitive WIM sensor description sheet Lane 1 1 2 2 3 3 4 4 Sensor serial number Position In lane L/R BC Temperature Before Before Sensor Outside BC Temperature After After Sensor Road Weigh Errors Y/N Note 1: If more than one sensor is installed in a lane indicate where the sensor is positioned relative to the direction of traffic. Note 2: BC indicates the BASECOUNT Capacitive weigh sensor as indicated on Telcom. Note 3: Record the temperate in degrees Celsius. Note 4: No sensor should be left installed that indicates Weigh Errors after proper connection has been made and the logger reset. MS001-96100-52 Installation of Fixed Capacitive HSWIM Sensors Issue5 1 March 2005 47 / 56
Page 1 and 2: Mikros Systems (Pty) Ltd Installati
Page 3 and 4: LIST OF CONTENTS DOCUMENT STATUS...
Page 5 and 6: 1 Installation types (permanent and
Page 7 and 8: 4 Selecting the sensor position In
Page 9 and 10: 5 Chart of main installations steps
Page 11 and 12: About fast curing concrete: The fas
Page 13 and 14: 6.4 Preparing frame for grouting Th
Page 15 and 16: 6.5 Preparation of epoxy grout The
Page 17 and 18: 6.7 Shimming and placing of sensor
Page 19 and 20: 6.10 Connecting the sensors The det
Page 21 and 22: Figure 1: 2m Capacitive WIM Sensor
Page 23 and 24: Figure 2b: 2m Capacitive WIM Sensor
Page 25 and 26: Figure 4: Typical Dimensions for Sc
Page 27 and 28: Figure 6: Sample Site Layout Sketch
Page 29 and 30: Annexure B: Required equipment and
Page 31 and 32: Slab installation material: Item De
Page 33 and 34: GROUT MIX SPECIFICATIONS MEGAPOXY:
Page 35 and 36: MS001-96100-52 Installation of Fixe
Page 37 and 38: Colas COLSEAL Specification sheet:
Page 39 and 40: Annexure D: Picture gallery MS001-9
Page 41 and 42: Picture 8: Mixing concrete Picture
Page 43 and 44: Picture 24: Prepare frame Picture 2
Page 45: Picture 40: Preparing hot-melt Pict
Page 49 and 50: Table 8: Capacitive WIM Installatio
Page 51 and 52: Note: The tables of this Annexure (
Page 53 and 54: General Termination of all sensor t
Page 55 and 56: Available Sensor Terminal Boxes Not

Installation of Fixed Capacitive HSWIM Sensors

Create successful ePaper yourself

Delete template?

Save as template?