HR6 Series.pdf - Genius

More documents

Recommendations

Info

Service Guide ColorPage-HR6/HR6 V2/HR6X series 2.1.3. How to Replace or Clean up the Document glass 1 Remove two Glass Stop Blocks [a] and [b] [a] [b] 2 With a screwdriver, press down the left end of the Glass Stop Block, and then push it to the right. Then, you may take the Glass Stop Block out of the glass holder, and release the space between the edge of the Document Glass and the Upper Housing. Glass Stop Block figure 2.1.3-1 Glass Holder 3 After the Glass Stop Block is removed, turn the Document Glass upside down to let it drop into the space between the edge of the Document Glass and the upper cover as mentioned in step 2. figure 2.1.3-2 figure 2.1.3-3 Version: 1.0 Page 21/59
Service Guide ColorPage-HR6/HR6 V2/HR6X series 4 Erect the Document Glass as shown in figure 2.1.3-4. 5 Gently take out the Document Glass. figure 2.1.3-4 6 Clean up the Document Glass with cotton cloth and water. figure 2.1.3-5 Caution Do not clean up the Document Glass with any chemical. 7 To install the Document Glass, reverse the steps shown above. Version: 1.0 Page 22/59
Page 1 and 2: KYE SYSTEMS CORP. ColorPage-HR6/HR6
Page 3 and 4: Service Guide ColorPage-HR6/HR6 V2/
Page 21: Service Guide ColorPage-HR6/HR6 V2/
Page 59: Service Guide ColorPage-HR6/HR6 V2/

HR6 Series.pdf - Genius

Create successful ePaper yourself

Delete template?

Save as template?