Instruction Manual - Indian Nations Detectors

More documents

Recommendations

Info

14 Introducing the Control Panel Coin Pressing activates the Coin Detect Mode (p. 22). Coin & Jewellery Pressing activates the Coin & Jewellery Detect Mode (p. 22). Power Pressing turns Safari On/Off. Holding for approx. five seconds resets the detector (p. 34) to the Factory Preset settings, prior to startup. Pinpoint Pressing turns Pinpoint On/Off . Pinpoint (p. 24) assists in locating the exact position of a target prior to recovery. Minus & Plus (–/+) Pressing in the Menu will step through the settings. Pressing within a Menu setting will adjust that setting (p. 25). Menu Used to access the Menu at any stage of detector operation. This allows access to various settings (p. 25).
15 Relic Pressing activates the Relic Detect Mode (p. 23). All Metal Pressing activates the All Metal Detect Mode (p. 23). Noise Cancel Starts the scan for the quietest operating frequency. The scan takes approx. 20 seconds (p. 27). Accept/Reject Pressing in the Detect Screen accepts or rejects the detected target (p. 30). Legend Scale When a target is detected it is categorized based on the types of metal objects that typically produce a similar kind of signal. This is represented by the “flashing” icon in the Graphic Identification Bar. The Legend Scale is designed to be a useful guide to the “probable” composition of a target based on the detected signal. The accuracy of this representation is dependent on certain factors such as: ground type, target conductivity, the angle of the target in the ground, its depth, age and physical condition. Note: In some instances this can result in similar target objects appearing in different areas of the Graphic Identification Bar, which is not unusual. For example, the metal content of older pennies compared to new pennies can vary greatly and aluminium objects such as pull tabs (ring-pulls) may also display similar characteristics. The broken lines on the Legend Scale, between typical target types, represent the potential for overlap. As you gain experience with your Safari you will become more familiar with the audio and visual clues that the detector will provide.
Page 1 and 2: Instruction Manual
Page 3 and 4: 1 Congratulations on purchasing you
Page 5 and 6: How Metal Detectors Work 3 Metal de
Page 7 and 8: Assembly 5 Attaching the coil to th
Page 9 and 10: 7 Attaching the Armrest Strap: 1 Cl
Page 11 and 12: 9 Adjusting the Length of the Shaft
Page 13 and 14: 11 Replacing ‘AA’ Batteries: 1
Page 15: Turning the Detector On 13 To Turn
Page 19 and 20: 17 Battery Power Icon This shows th
Page 21 and 22: A Simple Detecting Exercise 19 Befo
Page 23 and 24: Detect Modes 21 There are four fact
Page 25 and 26: 23 Relic Mode The Relic Mode has an
Page 27 and 28: Menu 25 The Safari has the followin
Page 29 and 30: 27 Threshold The Threshold controls
Page 31 and 32: 29 In High setting, Safari’s sign
Page 33 and 34: 31 Method 2 - To reject a specific
Page 35 and 36: Technical Specifications 33 Detecto
Page 37 and 38: Recovering the Target 35 A trowel,
Page 39 and 40: Detector Care and Safety 37 Safari
Page 41 and 42: Warranty and Accessories 39 There i
Page 43 and 44: The World Leader in Metal Sensing T

Instruction Manual - Indian Nations Detectors

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?