Instruction Manual - Indian Nations Detectors
Instruction Manual - Indian Nations Detectors
Instruction Manual - Indian Nations Detectors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
34 Factory Presets<br />
Detect Modes<br />
All Settings<br />
Setting Title Range Factory Preset My Preferred<br />
Discrimination<br />
Menu Settings<br />
Detect Mode<br />
Coin, Coin & Jewellery,<br />
Relic or All Metal<br />
Coin Mode<br />
Coin –10 to +40 –10 to +2 and +6 to +8<br />
Coin & Jewellery –10 to +40 –10 to –1<br />
Relic –10 to +40 –10 to –3<br />
All Metal –10 to +40 Open<br />
Sensitivity Auto or 0–20 Auto<br />
Threshold 0–40 12<br />
Noise Cancel – Automatic<br />
Target Volume 0–20 20<br />
Contrast 1–20 10<br />
Trash Density Low or High High<br />
– Each factory preset Detect Mode has a slot for saving your own User Mode (p. 29).<br />
To start the detector in the ‘Factory Preset’<br />
mode, (recommended in your first few<br />
outings) press and hold the Power button<br />
(approximately five seconds) until the Factory<br />
Preset message is displayed on the screen.