TE-RTD12 User Manual - I.C.T. Power Company Inc.

Motortronics
F026 - RTD #7 DESCRIPTION SELECTION
Select RTD Description Selection (0 – 1), Default Setting: 0 – Front Bearing (Fb)
Setting Assignment
0 Front Bearing (Fb)
1 RTD #7 (rt 7)
F027 - RTD #7 FRONT BEARING ALARM TEMPERATURE (0 – 464), Default Setting: OFF
Set RTD Temperature Alarm Level. When the RTD temperature reached this level Alarm “ALAr Fb” or
“ALAr rt 7” is shown on the keypad display. The Level can be programmed in Celsius or Fahrenheit depending
on the setting of F095.
Range 0 – 240 Degrees Celsius (F095 = 0)
Range 32 – 464 Degrees Fahrenheit (F095 = 1)
F028 - RTD #7 FRONT BEARING TRIP TEMPERATURE (0 – 464), Default Setting: OFF
Set RTD Temperature trip Level. When the RTD temperature reached this level trip “triP Fb” or “triP rt 7” is
shown on the keypad display. The Level can be programmed in Celsius or Fahrenheit depending on the setting
of F095.
Range 0 – 240 Degrees Celsius (F095 = 0)
Range 32 – 464 Degrees Fahrenheit (F095 = 1)
F029 – REAR BEARING TYPE SELECTION (0 – 4), Default Setting: 0 - OFF
Select RTD #8 Type
Setting Type
0 OFF
1 100 Ohm Pt (Platinum RTD)
2 10 Ohm Cu (Copper RTD)
3 100 Ohm Ni (Nickel RTD)
4 120 Ohm Ni (Nickel RTD)
F030 - RTD #8 DESCRIPTION SELECTION
Select RTD Description Selection (0 – 1), Default Setting: 0 – Rear Bearing (rb)
Setting Assignment
0 Rear Bearing (rb)
1 RTD #8 (rt 8)
F031 - RTD #8 REAR BEARING ALARM TEMPERATURE (0 – 464), Default Setting: OFF
Set RTD Temperature Alarm Level. When the RTD temperature reached this level Alarm “ALAr rb” or
“ALAr rt 8”is shown on the keypad display. The Level can be programmed in Celsius or Fahrenheit depending
on the setting of F095.
Range 0 – 240 Degrees Celsius (F095 = 0)
Range 32 – 464 Degrees Fahrenheit (F095 = 1)
www.motortronics.com Page 23