TE-RTD12 User Manual - I.C.T. Power Company Inc.

Motortronics
F037 – RTD #10 TYPE SELECTION (0 – 4), Default Setting: 0 - OFF
Select RTD #10 Type
Setting Type
0 OFF
1 100 Ohm Pt (Platinum RTD)
2 10 Ohm Cu (Copper RTD)
3 100 Ohm Ni (Nickel RTD)
4 120 Ohm Ni (Nickel RTD)
F038 - RTD #10 DESCRIPTION SELECTION
Select RTD Description Selection (0 – 1), Default Setting: 0 – Ambient (Abnt)
Setting Assignment
0 Ambient (Abnt)
1 RTD #10 (rt 10)
F039 - RTD #10 ALARM TEMPERATURE (0 – 464), Default Setting: OFF
Set RTD Temperature Alarm Level. When the RTD temperature reached this level Alarm “ALAr Abnt” or
“ALAr rt10” is shown on the keypad display. The Level can be programmed in Celsius or Fahrenheit depending
on the setting of F095.
Range 0 – 240 Degrees Celsius (F095 = 0)
Range 32 – 464 Degrees Fahrenheit (F095 = 1)
F040 - RTD #10 TRIP TEMPERATURE (0 – 464), Default Setting: OFF
Set RTD Temperature trip Level. When the RTD temperature reached this level trip “triP Abnt” or “triP rt10” is
shown on the keypad display. The Level can be programmed in Celsius or Fahrenheit depending on the setting
of F095.
Range 0 – 240 Degrees Celsius (F095 = 0)
Range 32 – 464 Degrees Fahrenheit (F095 = 1)
F041 – RTD #11 TYPE SELECTION (0 – 4), Default Setting: 0 - OFF
Select RTD #11 Type
Setting Type
0 OFF
1 100 Ohm Pt (Platinum RTD)
2 10 Ohm Cu (Copper RTD)
3 100 Ohm Ni (Nickel RTD)
4 120 Ohm Ni (Nickel RTD)
F042 - RTD #11 DESCRIPTION SELECTION
Select RTD Description Selection (0 – 1), Default Setting: 0 – User Defined (USr1)
Setting Assignment
0 User Defined (USr1)
1 RTD #11 (rt 11)
www.motortronics.com Page 25