singapore engineer singapore engineer singapore engineer

PROJECT APPLICATION
Contribution by Mapei
Mapei has put its mark on the new chapter in the life of this threemasted
clipper, by supplying products to install approximately
1000 m 2 of porcelain tiles (measuring 120 cm x 60 cm, 60 cm x
60 cm and 60 cm x 30 cm) produced by Domus.
Mapei’s KERAFLEX adhesive was recommended for installing
the floor and wall tiles in the reception area, the bathrooms
and the cafeteria area. This is a cementitious adhesive ideal for
bonding all types of ceramic tiles, mosaics and stone (that is not
sensitive to dampness) on internal and external walls and floors.
KERAFLEX has particularly good thixotropic properties, may be
applied on vertical surfaces without the tiles slipping, bonds well
to all materials, hardens without noticeable shrinkage, and has
extended open time.
Mapei’s ULTRACOLOR PLUS high performance mortar in 299
limestone colour shade was then used to grout the joints. This
anti-efflorescence, quick-setting and drying, polymer-modified
mortar is recommended for grouting joints that are 2 mm to
20 mm wide. It also incorporates BioBlock technology which
reduces the formation of mould and DropEffect technology
which makes the joints water-repellent.
Enquiry No: 10/101
Porcelain tiles were installed on floors and walls in various areas, using KERAFLEX.
34 THE SINGAPORE ENGINEER October 2012