2011 3 Series Owner's Manual without iDrive - Irvine BMW
2011 3 Series Owner's Manual without iDrive - Irvine BMW
2011 3 Series Owner's Manual without iDrive - Irvine BMW
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Lamps<br />
Setting the duration or deactivating<br />
For operating principle, refer to page 74.<br />
1. Switch on the ignition, refer to page 50.<br />
2. Lightly push button 1 in the turn indicator<br />
lever up or down repeatedly until the symbol<br />
appears in the display accompanied by<br />
the word "SET".<br />
Daytime running lights<br />
The daytime running lights light up in switch<br />
position 0, 1 and 3. They are less powerful than<br />
the low beams.<br />
Activating/deactivating daytime<br />
running lights<br />
For operating principle, refer to page 74.<br />
1. Switch on the ignition, refer to page 50.<br />
2. Lightly push button 1 in the turn indicator<br />
lever up or down repeatedly until the symbol<br />
appears in the display accompanied<br />
by the word "SET".<br />
3. Press button 2.<br />
4. Lightly push button 1 in the turn indicator<br />
lever down repeatedly until the symbol<br />
appears in the display.<br />
3. Press button 2.<br />
4. Lightly push button 1 in the turn indicator<br />
lever down repeatedly until the symbol<br />
appears in the display.<br />
5. Press button 2.<br />
6. Use button 1 to select:<br />
><br />
The function is deactivated.<br />
> ...<br />
Select the corresponding duration,<br />
e.g. 40 seconds.<br />
7. Press button 2.<br />
The setting is stored for the remote control<br />
currently in use.<br />
5. Press button 2.<br />
6. Use button 1 to select:<br />
><br />
Daytime running lights activated.<br />
><br />
Daytime running lights deactivated.<br />
7. Press button 2.<br />
The setting is stored for the remote<br />
control currently in use.<br />
92