Leica TPS700 Series User Manual

PC Program Package Leica Geo Office Tools (LGO-Tools)
The program package LGO-Tools is
used for the data exchange between
the Total Station and the PC. It
contains several auxiliary programs
in order to support your use of the
Instrument.
Installation on the PC
The installation program can be
found on the CDROM supplied.
Please note that LGO-Tools can only
be installed on computers with MS
Windows 98, 2000 or XP operating
systems.
Any previous versions of
LGO-Tools on your
computer must be
uninstalled first before
installing the new version.
For the installation call program
"setup.exe" in the directory \LGO-
Tools on the CD-ROM and follow the
input instructions of the installation
program.
Introduction
Program content
After successful installation the
following programs appear:
Tools
• Data Exchange Manager
For data exchange of coordinates,
measurements, codelists and
output formats between
instrument and PC.
• Coordinate Editor
Import/Export as well as creating
and processing of coordinate files.
• Codelist Manager
For creating and processing of
codelists.
• Software Upload
For loading/deleting system
software, application programs
and EDM-software as well as
system/application texts.
Before the Software Upload,
always insert a charged
battery into the instrument.
14
• Format Manager
For creating of own, special
formatted data output files.
• Configuration Manager
Import/Export as well as creating
of instrument configuration.
For more information about
LGO-Tools refer to the
comprehensive Online Help.
TPS700 User Manual 2.4.0en