Leica TPS700 Series User Manual
Leica TPS700 Series User Manual
Leica TPS700 Series User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Checking and Adjusting<br />
Tripod<br />
1 2<br />
Circular Level<br />
Circular Level on the Tribrach<br />
TC700Z43<br />
TC700Z44<br />
TC700Z45<br />
The connections between metal and<br />
timber components must always be<br />
firm and tight.<br />
• Tighten the Allen screws (2)<br />
moderately.<br />
• Tighten the articulated joints on<br />
the tripod head (1) just enough to<br />
keep the tripod legs open when<br />
you lift it off the ground.<br />
Checking and Adjusting<br />
Level-up the instrument in advance<br />
with the electronic level. The bubble<br />
must be centered. If it extends<br />
beyond the circle, use the Allen key<br />
supplied to center it by turning the<br />
adjustment screws.<br />
After adjustment no screw must be<br />
loose.<br />
36<br />
Level the instrument and then<br />
remove it from the tribrach. If the<br />
bubble is not centred, adjust it using<br />
the adjusting pin.<br />
Turning the adjustment screws:<br />
• to the left: the bubble approaches<br />
the screw<br />
• to the right: the bubble goes away<br />
from the screw.<br />
After adjustment no screw must be<br />
loose.<br />
<strong>TPS700</strong> <strong>User</strong> <strong>Manual</strong> 2.4.0en
Change language