AFOLUX CX Series Flat Panel PC User Manual - iPCMAX.com
AFOLUX CX Series Flat Panel PC User Manual - iPCMAX.com
AFOLUX CX Series Flat Panel PC User Manual - iPCMAX.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>AFOLUX</strong> <strong>CX</strong> <strong>Series</strong> <strong>Flat</strong> <strong>Panel</strong> <strong>PC</strong><br />
<br />
Terminal Type<br />
<br />
VT-UTF8 Combo Key Support<br />
These configuration options are discussed below.<br />
<br />
Serial Port Number [COM1]<br />
Use the Serial Port Number option allows to select the serial port used for remote<br />
access.<br />
COM1 DEFAULT System is remotely accessed through COM1<br />
COM2 System is remotely accessed through COM2<br />
NOTE: Make sure the selected COM port is enabled through the Super I/O configuration<br />
menu.<br />
<br />
Base Address, IRQ [3F8h,4]<br />
The Base Address, IRQ option cannot be configured and only shows the interrupt<br />
address of the serial port listed above.<br />
<br />
Serial Port Mode [115200 8,n,1]<br />
Use the Serial Port Mode option to select baud rate through which the console redirection<br />
is made. The following configuration options are available<br />
• 115200 8,n,1 DEFAULT<br />
• 57600 8,n,1<br />
• 38400 8,n,1<br />
• 19200 8,n,1<br />
• 09600 8,n,1<br />
Page 88
Change language