E New Products

Powercast Floodlight for metal halide lamps
Housing: corrosion-resistant cast aluminium,
No-Rinse surface treatment.
Double powder-coated. Optimised surface
for reduced accumulation of dirt.
Mounting bracket: steel, hot galvanized,
±90° tilt.
Control gear with temperature controller,
timer-ignitor and capacitor. 2 cable
entries and M25 cable glands. Throughwiring
possible. 5-pole terminal block.
Screw-mounted cover with safety glass:
corrosion-resistant cast aluminium,
double powder-coated. Hinge open for
lamp replacement.
Reflector replacement without tools:
aluminium, silver, mirror-finish anodised.
360° rotation. Softec lens.
Fitting the cable glands and mounting
bracket to the housing must be carried
out on site.
Protection mode IP65: dust-proof and
water jet-proof.
Accessories page 65
34216.000 Graphit m
HIT-CE 35W G12 3300lm
Spherolit reflector, washlight.
Weight 5.40kg LMF E
Maximum wind load area 0.063m²
krrIP65 138
46 3
216
46663
∅ 194
4663
3 46666666
402
HIT-CE
Mean illuminance E n (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
Wall height (m) 4.0
Offset from wall (m) 2.50 3.00 3.00 4.00
Luminaire spacing (m) 2.00 2.00 3.00 3.00
Illuminance E n (lx) 177 163 110 90
34217.000 Graphit m
HIT-CE 70W G12 6600lm
Spherolit reflector, washlight.
Weight 5.80kg LMF E
Maximum wind load area 0.063m²
krrIP65 138
46 3
216
46663
∅ 194
4663
3 46666666
402
HIT-CE
Mean illuminance E n (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
Wall height (m) 6.0
Offset from wall (m) 3.00 4.00 4.00 6.00
Luminaire spacing (m) 2.00 3.00 4.00 4.00
Illuminance E n (lx) 221 140 105 85
Housing: corrosion-resistant cast aluminium,
No-Rinse surface treatment.
Double powder-coated. Optimised surface
for reduced accumulation of dirt.
Mounting bracket: steel, hot galvanized,
±90° tilt.
Control gear with temperature controller,
timer-ignitor and capacitor. 2 cable
entries and M25 cable glands. Throughwiring
possible. 5-pole terminal block.
Screw-mounted cover with safety glass:
corrosion-resistant cast aluminium,
double powder-coated. Hinge open for
lamp replacement. Concealed fixing
ring for accessories.
Reflector replacement without tools:
aluminium, silver, mirror-finish anodised.
360° rotation.
Fitting the cable glands and mounting
bracket to the housing must be carried
out on site.
Protection mode IP65: dust-proof and
water jet-proof.
Accessories page 65
34235.000 Graphit m
HIT-CE 150W G12 14000lm
Spherolit reflector, washlight.
Weight 8.80kg LMF E
Maximum wind load area 0.119m²
krrIP65
3 46666
∅ 264
178 290
4663
466663
3 4666666666
522
HIT-CE
Mean illuminance E n (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
Wall height (m) 8.0
Offset from wall (m) 4.00 6.00 6.00 8.00
Luminaire spacing (m) 4.00 4.00 6.00 6.00
Illuminance E n (lx) 210 179 120 98
34241.000 Graphit m
HIT-CE 250W G12 23000lm
Spherolit reflector, washlight.
Weight 10.00kg LMF E
Maximum wind load area 0.119m²
krrIP65
3 46666
∅ 264
178 290
4663
466663
3 4666666666
522
HIT-CE
Mean illuminance E n (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
Wall height (m) 10.0
Offset from wall (m) 6.00 8.00 8.00 10.00
Luminaire spacing (m) 6.00 6.00 8.00 8.00
Illuminance E n (lx) 175 153 115 99
64 ERCO New Products 2009 www.erco.com