EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight

ARTEMIS 12 BOLLARD
12 VOLT
OR
120 VOLT
BLP Finish
ORdERING GUIdE: Bd-A-300-12
BD (BOLLArD) A (ArTEMIS) 300 (3”DIAMETEr) 12 (12” ShADE SIZE)
[11] 10W 10°
Mr11 (2,000 hr)
[21] 20W 10°
Mr11 (2,000 hr)
[31] 35W 10°
Mr11 (2,000 hr)
[3] ThrEE DISCS
[2] TWO DISCS
[0] nO DISCS
aRTEMiS 12 BOLLaRD
*not recommended for
24” & 30” models
The grand styling and regal beauty of the Artemis series
make it at home in the finest of estates. This is our flagship
product sure to capture everyone’s attention. For
those familiar with Auroralight, the quality engineering
and performance will come as no surprise. The Artemis
is engineered and manufactured without compromise, it
is assembled with stainless fasteners, Pyrex glass and
high-temperature silicone O-rings so unwanted moisture
is completely sealed out. The larger Artemis 12 is suitable
for lighting driveways or large lawn areas with the
10” Artemis used on smaller scale areas of the same project.
The Artemis features an indirect light source with a
segmented micro-reflector for exceptional performance
without glare. Available with three, two, or no discs, external
shielding, frosted or clear lens, a choice of five
mounting options to include: an oversized ground stake,
standard ground stake, a leveling pedestal with copper
trim, 1/2” universal adapter, or a 4” surface mount with
copper trim.
VOLTAGE MOUNT
LAMP OPTIONS # Of dIScS OPTIONS OPTIONS fINISheS AcceSSOrIeS
L/P 1/2” S/M
G/S2.5
1/2” mount not available on 120v units.
[12V] 12 vOLT [G/S2] GrOUnD STAkE
[120V] 120 vOLT [G/S2.5] GrOUnD STAkE
[L/P] LEvELInG PEDESTAL
[S/M] SUrFACE MOUnT
[1/2”] UnIvErSAL 1/2”
MALE ADAPTEr*
G/S2
12”
305mm
2 1/2”
63mm
19
30”
762mm
[NAT] nATUrAL
[BLP] BrOnZE LIvInG
PATInA
example
[ES180°] ExTErnAL GLArE ShIELD
[F] FrOSTED LEnS
BD-A-300-12-11-3-12V-G/S2-NAT-ES180°