EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight

TRELOS BOLLaRD
Built upon the solid framework of the Eos Bollard, the
Trelos features a 3 1/2” solid copper cone topped off with
a machined brass finial, giving the Trelos a personality
all of its own. This fixture is equally at home in a small
garden or on the front steps of a sprawling estate. It is
machined from solid copper and brass bar stock, and
assembled with stainless fasteners, Pyrex glass, and
high-temperature silicone O-rings to seal out unwanted
moisture. An indirect light source with a segmented
micro-reflector ensures excellent performance without
glare. Available options include: frosted or clear lens
and a choice of 18” or 24” overall height. The Trelos is
shipped complete with a 20 watt lamp and ground stake.
Also available in LED.
ORdERING GUIdE: Bd-T-200
BD (BOLLArD) T (TrELOS) 200 (2” DIAMETEr)
[12] 10W 23˚ Mr8 (2,000 hr)
[21] 20W 10˚ Mr8 (2,000 hr)
[LEd] 2.5W, 2900k, .7A,
50,000 hr**
**LED life is defined as the time to 70%
lumen maintenance (L70)
[G/S] GrOUnD STAkE
InCLUDED*
[T/R] TrIDEnT SPIkE
6”, 9” or 12”
[P/S] POWEr STAkE 120v/12v
[1/2”] UnIvErSAL 1/2”
MALE ADAPTEr
[NAT] nATUrAL
[BLP] BrOnZE LIvInG PATInA
12 VOLT
Remote
Transformer
Required
LAMP OPTIONS HEIGHT # OF DISCS MOUNT OPTIONS FINISHES ACCESSOrIES
[18] 18”
[24] 24”
1/2” *G/S T/R P/S
[2] TWO DISCS
[0] nO DISCS
28
3 1/2”
88mm
2”
51mm
18”
457mm
example
NAT Finish
BD-T-200-12-18-2-G/S-NAT-F
[F] FrOSTED LEnS
TRELOS BOLLARD
OPTIONAL