EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight

PL7 ecLiPse
OPTIONAL
12 VOLT
Remote
Transformer
Required
ORdERING GUIdE: PL7
PL (PATh LIGhT) 7 (7” ShADE SIZE)
LAMP OPTIONS MOUNT OPTIONS FINISHES
[35] 35W TUnGSTEn hALOGEn (2,000 hr) 650 lm
[20] 20W TUnGSTEn hALOGEn (4,000 hr) 350 lm
[10] 10W TUnGSTEn hALOGEn (4,000 hr) 140 lm
[5] 5W TUnGSTEn hALOGEn (2,000 hr) 60 lm
[20x] 20W xEnOn (5,000 hr) 200 lm
[15x] 15W xEnOn (10,000 hr) 150 lm
[10x] 10W xEnOn (10,000 hr) 100 lm
[LEd] 2.5W, 2900k, .7A, 50,000 hr**
** LED life is defined as the time to 70% lumen
maintenance (L70)
NAT Finish
1/2” *G/S T/R P/S
19”
483mm
7”
178mm
2”
50mm
[1/2] 1/2” MALE ThrEAD
[G/S] GrOUnD STAkE InCLUDED*
[T/R] TrIDEnT SPIkE 6”, 9” or 12”
[P/S] POWEr STAkE 120v/12v
PL7-35-G/S-NAT-90
PL7 ECLiPSE
The graceful styling of the Eclipse offers the designer
a flexible choice that complements any setting without
competing with it. Accepts up to a 35 watt halogen lamp
for applications with high-performance requirements.
Innovative construction seamlessly integrates a
white powder coated stainless steel reflector into a
heavy-gauge copper shade for a lifetime of service.
recommended spacing ranges from 15’ to 25’ on center.
The Advanced Optical System combines vertical beam
control (ALP), with a variety of Directional reflectors
(Dr) for horizontal beam control. The ALP mechanism
allows for easy adjustments to accommodate a wide
range of site conditions. The Dr controls the pattern of
light on the ground. Adding an Internal Diffusion (ID)
accessory will scatter the light for a softer glow with no
shadowing. Shipped complete with a 12 volt 10 watt
halogen lamp and oversized ABS ground stake. Covered
by Auroralight’s Lifetime Warranty. Also available in
LED.
[NAT] nATUrAL
[BLP] BrOnZE LIvInG PATInA
EXAMPLE ACCESSORIES
43
[90] 90˚
[180] 180˚
[240] 240˚
[300] 300˚
[Id] 360˚
LED not compatible with all
Directional reflectors