EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight

LSL2 KEnTia
The kentia is a compact low-energy LED spotlight machined
from solid bar stock. Artistic styling and precise machining
make this fixture attractive and functional, interchangeable
optics allow the designer to efficiently utilize light output
by focusing it directly on the subject. Engineered primarily
as a heat sink for the high Flux LED array, the kentia
addresses the need for thermal management head on.
The exceptional thermal conductivity of brass or copper
construction together with the finned design provides
excellent convection to the exterior environment. The
kentia has an integral LED driver that allows it to operate
on standard 12 volt systems with no additional hardware
needed. The newly re-designed kentia, while not intended
for submerged applications, is engineered to IP 68 standards
protecting against water intrusion. Testing at the factory by
total submersion virtually guarantees that the luminaire
and all its internal components will remain protected from
moisture regardless of mounting orientation. The new
kentia’s light output has increased by 100%.
ORdERING GUIdE: LSL2
L (LED) SL (SPOTLIGhT) 2 (SErIES)
Materials Optics leD MOunts Finishes eXaMple
[BR] BrASS
[CU] COPPEr
[N] nArrOW 10
[M] MEDIUM 25
[W] WIDE 40
Light Source:
LED Life (L70):
Input Voltage:
Current Rating:
Watts:
Color Temperature:
Color Temperature:
[WW] WArM WhITE 2900k
[CW] COOL WhITE 5700k
high-brightness LED
50,000 hours average*
11 to 15v AC or DC
350ma (0.35 Amps)
3.6 W
2900 CCT (k) Typical [WW]
5700 CCT (k) Typical [CW]
*LED life is defined as the time to 70% lumen maintenance (L70)
BLP Finish
[G/S] GrOUnD STAkE [NAT] nATUrAL
[1/2] 1/2” MALE ThrEAD
[T/M] TrELLIS MOUnT
[4/0] 4” SUrFACE MOUnT
[T/S] TrEE STrAP Or T/S-hD
[S/B] SPLICE BOx
[J/B] 5” J-BOx MOUnT
[BLP] BrOnZE LIvInG PATInA
[T/R] TrIDEnT SPIkE 6”, 9” or 12”
[P/S] POWEr STAkE 120v-12v
[9x18] TELESCOPIC rISEr**
[C/P] COvEr PLATE
**Also available in 5x10, 7x14 & 11x22
1/2” S/B C/P T/M 4/0 T/S
SPECIFICATIONS
CRI:
Lens:
Optic:
Material:
Mounting:
Operating Temperature:
Certification:
4
12 VOLT
Remote
Transformer
Required
LSL2-CU-N-CW-T/M-BLP
9x18 G/S
6 1/8”
155mm
T/R P/S
2”
50mm
80 Typical
Flat Pyrex Glass
Optical Grade PMMA TIr reflector
Machined Brass and or Copper with Stainless hardware
AMS (Aurora Mount System)
-31 to 124F (-35 to 51C)
UL Listed to standard 1838
J/B
LSL2 KENTIA