EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight

HELiOS BOLLaRD
Built upon the stately and noble Pharos Bollard, the helios
features a heavy-gauge solid copper disc positioned
to allow just a dapple of light upon the surface of the
top. The helios features an indirect light source with a
segmented micro-reflector for exceptional performance
with no glare. Machined from solid copper and brass bar
stock, it is assembled with stainless fasteners, Pyrex
glass and high-temperature silicone O-rings so unwanted
moisture is completely sealed out. The helios is built to
survive the harshest environs but is equally at home in
paradise. Available in four overall heights, three, two, or
no discs, external shielding, frosted or clear lens, a choice
of five mounting options from an oversized ground stake
to a sophisticated leveling pedestal with copper trim, and
Mr11 halogen lamps in three wattages.
ORdERING GUIdE: Bd-S-300
BD (BOLLArD) S (hELIOS) 300 (3”DIAMETEr)
[11] 10W 10°
Mr11 (2,000 hr)
[21] 20W 10°
Mr11 (2,000 hr)
[31] 35W 10°
Mr11 (2,000 hr)
[15] 15”
[19] 19”
[24] 24”
[30] 30”
L/P 1/2” S/M
G/S2.5
1/2” mount not available on 120v units.
[3] ThrEE DISCS
[2] TWO DISCS
[0] nO DISCS
G/S2
[12V] 12 vOLT [G/S2] GrOUnD STAkE
[120V] 120 vOLT [G/S2.5] GrOUnD STAkE
[L/P] LEvELInG PEDESTAL
[S/M] SUrFACE MOUnT
[1/2”] UnIvErSAL 1/2”
MALE ADAPTEr*
*not recommended for
24” & 30” models
example
8”
203mm
2 1/2”
63mm
[NAT] nATUrAL
[BLP] BrOnZE LIvInG
PATInA
12 VOLT
OR
120 VOLT
NAT Finish
VOLTAGE MOUNT
LAMP OPTIONS HEIGHT # Of dIScS OPTIONS OPTIONS fINISHES AccESSOrIES
22
19”
483mm
BD-S-300-11-15-3-12V-G/S2-NAT-ES180°
[ES 180°] ExTErnAL
GLArE ShIELD
[F] FrOSTED LEnS
[BR] BrASS FInIAL
[CU] COPPEr FInIAL
HELIOS BOLLARD