EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight

ARTEMIS 8 BOLLARD
12 VOLT
OR
120 VOLT
NAT Finish
ORdERING GUIdE: Bd-A-300-8
BD (BOLLArD) A (ArTEMIS) 300 (3”DIAMETEr) 8 (8” ShADE SIZE)
[11] 10W 10°
Mr11 (2,000 hr)
[21] 20W 10°
Mr11 (2,000 hr)
[31] 35W 10°
Mr11 (2,000 hr)
[3] ThrEE DISCS
[2] TWO DISCS
[0] nO DISCS
*not recommended for
24” & 30” models
aRTEMiS 8 BOLLaRD
The traditional styling and timeless beauty of the Artemis
series make it at home in the finest of estates. For those
familiar with Auroralight, the quality engineering and
performance will come as no surprise; simply put, the
Artemis is engineered and manufactured without compromise.
It is assembled with stainless fasteners, Pyrex
glass and high-temperature silicone O-rings so unwanted
moisture is completely sealed out. The Artemis features
an indirect light source with a segmented micro-reflector
for exceptional performance with no glare. Available with
three, two, or no discs, external shielding, frosted or clear
lens and a choice of five mounting options to include: an
oversized ground stake, standard ground stake, a leveling
pedestal with copper trim, 1/2” universal adapter, or
a 4” surface mount with copper trim. The Artemis 8 is of
course covered by our Lifetime Warranty.
VOLTAGE MOUNT
LAMP OPTIONS # Of dIScS OPTIONS OPTIONS fINISheS AcceSSOrIeS
L/P 1/2” S/M
G/S2.5
1/2” mount not available on 120v units.
[12V] 12 vOLT [G/S2] GrOUnD STAkE
[120V] 120 vOLT [G/S2.5] GrOUnD STAkE
[L/P] LEvELInG PEDESTAL
[S/M] SUrFACE MOUnT
[1/2”] UnIvErSAL 1/2”
MALE ADAPTEr*
G/S2
8”
203mm
2 1/2”
63mm
21
24”
610mm
[NAT] nATUrAL
[BLP] BrOnZE LIvInG
PATInA
example
[ES180°] ExTErnAL GLArE ShIELD
[F] FrOSTED LEnS
BD-A-300-8-11-3-12V-G/S2-NAT-ES180°