EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight
EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight
EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BOLLaRD MOUnTS<br />
Bd-300 SERIES BOLLARd MOUNT OPTIONS<br />
BD-L/P Leveling Pedestal<br />
The Leveling Pedestal is a perfect mount when installing any 300 series bollard onto a<br />
concrete footing. Equipped with three stainless steel leveling feet this mount corrects for<br />
concrete footing imperfections and levels the bollard mounting base resulting in level<br />
installations up to 6° off horizontal. This mount is designed to fit over up to three 3/4” PvC<br />
bundled conduits.<br />
BD-G/S2 Ground Stake<br />
The G/S2 2” diameter stake stabilizes any 300 series bollard up to 30” high. This mount<br />
is designed for ground installations and can accommodate up to one 3/4” or three 1/2”<br />
conduits.<br />
BD-G/S2.5 Ground Stake<br />
The G/S2.5 2 1/2” diameter stake stabilizes any 300 series bollard up to 30” high. This mount<br />
is designed for ground installations and can accommodate up to three 3/4” or four 1/2”<br />
conduits.<br />
BD-S/M Surface Mount<br />
Machined from solid brass the Surface Mount is equipped with stainless steel hardware<br />
and a unobtrusive spun copper escutcheon plate. For clean installations of up to 30” high<br />
bollards mounted to solid level surfaces only.<br />
BD-1/2 Universal 1/2” Male Adapter<br />
The 1/2” adapter provides flexibility to mount onto a variety of off-the-shelf electrical<br />
devices. not recommended for bollards over 19” high.<br />
Bd-200 SERIES BOLLARd MOUNT OPTIONS<br />
PL-G/S Ground Stake<br />
The PL-G/S mount stake stabilizes our larger scale path lights and our 200 series line of<br />
bollards. To be used for ground installations with remote transformer. This is the default<br />
mount for the 200 series bollards.<br />
PL-1/2 Universal 1/2” Male Adapter<br />
The 1/2” mount does not come with a stake and is intended for mounting to 1/2” nPS<br />
threaded electrical devices such as the Power Stake (shown below).<br />
PL-TR Trident Spike 6”, 9” or 12”<br />
The Trident Spike stabilizes luminaires when mounted in loose soil with its 4” x 1/4” thick<br />
mount plate. Available in 6”, 9” or 12” spike lengths the Trident Spike is constructed entirely<br />
from stainless steel. This hearty mount can be used with path lights and our 200 series line<br />
of bollards.<br />
PL-P/S Power Stake<br />
The Power Stake transformer enclosure provides for 120 volt line voltage feed to our low<br />
voltage luminaires and 200 series line of bollards. The Power Stake is equipped with a 75<br />
watt electronic transformer and an aggressive PvC stake which can accommodate up to<br />
three 3/4” or four 1/2” conduits.<br />
30<br />
BOLLARD MOUNTS