EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight

LSM1 CASCADE
Light Source:
LED Life (L70):
Input Voltage:
Current Rating:
Watts:
Color Temperature:
BLP Finish
ORdERING GUIdE: LSM1
L (LED) SM (SUrFACE MOUnT) 1 (SErIES)
HOUSING FINISHeS eXAMPLe
[BR] BrASS
[CU] COPPEr
4 1/4”
108mm
2 1/4”
57mm
[NAT] nATUrAL
[BLP] BrOnZE LIvInG PATInA
high-brightness LED
50,000 hours average*
5 to 15v AC or DC
350ma (0.35 Amps)
1.25W
2900 CCT (k) Typical
*LED life is defined as the time to 70% lumen maintenance (L70)
12 VOLT
Remote
Transformer
Required
2 3/4”
70mm
7/8”
22mm
3 1/2”
88mm
SPECIFICATIONS
CRI:
Lens:
Material:
Backplate:
Operating Temperature:
Certification:
51
LSM1-BR-NAT
LSM1 CaSCaDE
The Cascade is a low-energy surface mounted LED
wall light that offers excellent low-level illumination of
walkways in a stylish yet rugged design. The solid copper
back plate is laser cut to adapt to any 3” or 4” round
electrical box recessed into the wall or may be simply
surface mounted without any additional box. radial
slotted mount holes allow the fixture to be rotated to level
and then tightened securely in place ensuring a perfect
installation. The mass and style of the fixture provide an
optimal heat-sink for the cutting-edge high-brightness
LED. The LED control module is sealed into the luminaire
with thermally conductive epoxy and allows the fixture
to operate on standard 12 volt AC systems with no
additional hardware needed. Quality and performance
unique to Auroralight, backed by our lifetime warranty;
the Cascade has no equal!
80 Typical
Clear Acrylic, Impact and Uv resistant
Machined Brass or Copper with Copper Backplate
Copper
-31 to 124F (-35 to 51C)
UL standard 1838