EXCLUSIVE LIFETIME REPAIR OR REPLACE ... - Auroralight

LSL3 TiTan
BLP Finish
[BR] BrASS
[CU] COPPEr
Light Source:
LED Life (L70):
Input Voltage:
Current Rating:
Watts:
Color Temperature:
Color Temperature:
12 VOLT
Remote
Transformer
Required
ORdERING GUIdE: LSL3
L (LED) SL (SPOTLIGhT) 3 (SErIES)
[N] nArrOW 10
[M] MEDIUM 25
[W] WIDE 40
6 3/4”
171mm
Materials Optics leD MOunts Finishes eXaMple
[WW] WArM WhITE 2900k
[CW] COOL WhITE 5700k
high-brightness LED
50,000 hours average*
11 to 15v AC or DC
700ma (0.70 Amps)
7.5W
2900 CCT (k) Typical [WW]
5700 CCT (k) Typical [CW]
*LED life is defined as the time to 70% lumen maintenance (L70)
CRI:
Lens:
Optic:
Material:
Mounting:
Operating Temperature:
Certification:
LSL3 TiTan
The Titan is a high-performance low-energy LED spotlight
machined from solid brass bar stock. Artistic styling and
precise machining make this fixture both attractive and
functional, interchangeable optics allow the designer to
efficiently utilize light output by focusing it directly on
the subject. Engineered primarily as a heat sink for the
high Flux LED array, the Titan addresses the need for
thermal management head on. The exceptional thermal
conductivity of brass or copper construction together
with the finned design provides excellent convection to
the exterior environment. The Titan has an integral LED
driver that allows it to operate on standard 12 volt systems
with no additional hardware needed. The newly redesigned
Titan fixture, while not intended for submerged
applications, is engineered to IP 68 standards protecting
against water intrusion. Testing at the factory by total
submersion virtually guarantees that the luminaire and
all its internal components will remain protected from
moisture regardless of mounting orientation or location.
[G/S] GrOUnD STAkE [NAT] nATUrAL
[1/2] 1/2” MALE ThrEAD
[T/M] TrELLIS MOUnT
[4/0] 4” SUrFACE MOUnT
[BLP] BrOnZE LIvInG PATInA
[T/S-Hd] TrEE STrAP (hEAvY DUTY)
[S/B] SPLICE BOx
[J/B] 5” J-BOx MOUnT
[T/R] TrIDEnT SPIkE 6”, 9” or 12”
[P/S] POWEr STAkE 120v-12v
[9x18] TELESCOPIC rISEr**
[C/P] COvEr PLATE
**Also available in 5x10, 7x14 & 11x22
1/2” S/B C/P T/M 4/0 T/S-Hd
SPECIFICATIONS
3
2 1/2”
63mm
LSL3-BR-M-WW-G/S-NAT
9x18 G/S
T/R P/S
80 Typical
Flat Pyrex Glass
Optical Grade PMMA TIr reflector
Machined Brass and or Copper with Stainless hardware
AMS (Aurora Mount System)
-31 to 124F (-35 to 51C)
UL Listed to standard 1838
J/B