What is SVDrive2.pdf - of downloads

More documents

Recommendations

Info

In the RS232 mode, the speed of the drive is set by entering a number for the set speed value. Trend Takes you to the trend page. With the trend page you can display three measured signals from the drive. However, only one signal is shown at a time. You can change between these three signals by choosing a signal from the Channel: box. Click on the Signal name: box to choose a signal. You can start and stop the trend by clicking the start/stop symbols: You can also change the minimum and maximum of the value axis and the length of the time axis. Signal value and time on the position of the marker are shown in the trend box. Click arrow buttons or directly on the trend box to see the value and time at that position. If the connection to the drive is lost for some reason, you can reconnect by choosing a signal in the Signal name: window 10
Note! You can not Save or Open parameter files when the Trend page is opened. The Info page Choose Drive|Info to get information about the drive software. On the info page you will see: You can also change the file in the option card by choosing new file from the dropdown list and then pressing the Change button. 11
Page 1 and 2: What is SVDrive2? SVDrive2 is a Win
Page 3 and 4: Note that if you choose a 400 V dri
Page 5 and 6: 3. You can change the active applic
Page 7 and 8: The port chosen is stored in SVDriv
Page 9: You can clear the fault history by
Page 13: Making comments on your printout Us

What is SVDrive2.pdf - of downloads

Create successful ePaper yourself

Delete template?

Save as template?