2011 Suzuki CSR Report - global suzuki
2011 Suzuki CSR Report - global suzuki
2011 Suzuki CSR Report - global suzuki
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Introduction<br />
Special Topics<br />
Corporate<br />
Philosophy and <strong>CSR</strong><br />
Environmental<br />
Responsibility<br />
Social<br />
Responsibility<br />
Data<br />
01 Efforts for Development<br />
SUZUKI <strong>CSR</strong> REPORT <strong>2011</strong><br />
Promoting the Three Rs (Reduce, Reuse, and Recycle)<br />
Promoting resource recycling through Reduce, Reuse, and Recycling activities in all areas of<br />
products, manufacturing, distribution, etc. to effectively use limited resources<br />
<strong>Suzuki</strong> believes that it is important to effectively utilize limited resources in order to pass on to the next<br />
generation a bountiful society. We are trying to promote recycling of resources through our business activities<br />
by carefully considering "Reducing" (reducing weight of parts and improving yield to reduce consumption of raw<br />
materials), "Reusing" (using rebuilt parts made of used parts as it is again for supply), and "Recycling" (collecting<br />
and using unnecessary items as raw materials for another product).<br />
01 Efforts for Development<br />
Automobiles<br />
■Reducing<br />
Among 3Rs, the first priority should be “Reducing<br />
(reduction the amount of wastes)”. Under the policy of<br />
making parts Smaller, Fewer, Lighter, Shorter, and Neater,<br />
<strong>Suzuki</strong> is promoting reduction of wastes by thoroughly<br />
reducing weight and materials to be used. For example,<br />
the front bumper of LAPIN has been slimmed through<br />
reduction of the wall thickness of bumper body and<br />
perforation of the license plate and radiator grill fitting<br />
parts of bumper body.<br />
Efforts for Reducing<br />
(example: front bumper of LAPIN)<br />
Perforation of the<br />
radiator grill fitting part<br />
Reduction of<br />
bumper body<br />
thickness<br />
Major Components Using Recyclable Resinous Materials<br />
(Example: Exterior components of MR Wagon)<br />
Headlamp<br />
Grille<br />
Cowl Top<br />
Garnish<br />
Bumper<br />
Door Mirror<br />
Door Handle<br />
Fender<br />
Lining<br />
Rear Combination<br />
Lamp<br />
Back Door<br />
Garnish<br />
Perforation of license<br />
plate fitting part<br />
■Recyclable design<br />
Recyclable vehicle design is an important factor to allow<br />
for easy recycling of end-of-life vehicles. To produce<br />
environmentally-friendly vehicles, <strong>Suzuki</strong> uses easy-torecycle<br />
materials in exterior and interior resinous parts.<br />
Use of Easily Recyclable Resinous Materials<br />
Plastic is roughly divided into two types: “Thermoset<br />
resin”* 1 and “Thermoplastic resin”* 2 .<br />
By applying the thermoplastic resin to almost all<br />
plastic parts, <strong>Suzuki</strong> is promoting environmentallyfriendly<br />
vehicle manufacturing.<br />
Wheel Cap<br />
Back Door<br />
Handle<br />
Bumper<br />
1 Thermoset resin<br />
*<br />
This type of resin material will not be softened or melted by<br />
reheating after being hardened by heat or pressure.<br />
It is like a bisket or ceramic.<br />
*<br />
2 Thermoplastic resin:<br />
Even after being formed, this type of resin material can be<br />
softened or melted by reheating and will be solidified by cooling. It<br />
is reusable through repetitive melting and solidifying.<br />
It is like a chocolate and candy.<br />
●<br />
37<br />
●