VSH Press - Pinhol

More documents

Recommendations

Info

3.2 VSH Press Sprinkler tube VSH Press Sprinkler tubes are available in the dimensions DN20 to DN100 (22-108 mm). Entry of dirt during transportation or storage is prevented by caps at both ends of the tube and utilizing the correct packaging for distribution. Fire behaviour VSH Press Sprinkler tubes are classified as non-combustible tubes of building material class A, DIN 4102, part 1. 10 3.2.1 VSH Press Sprinkler Galvanized The VSH Press Sprinkler Galvanized tubes for wet sprinkler systems are thin-walled precision steel tubes. The tubes are made from cold rolled steel that is galvanized using the Sendzimir process. During this process zinc is brought onto the metal strip, running through a zinc bath, covering both sides simultaneously. The tube is protected both on the inside and outside with a zinc layer. The thickness of this layer is minimal 20 μm. After welding the welding seam is zinc plated additionally. With the Sendzimir process a good adhesion of the zinc layer and corrosion resistance are achieved. 3.2.2 VSH Press Sprinkler Stainless The VSH Press Sprinkler Stainless tubes are suitable for wet and dry sprinkler systems and are also thin-walled precision steel tubes. The outer- and inner surfaces of the tubes are blank, free of discoloration and are supplied free of manufacturing residue that could otherwise cause corrosion. The strict size tolerances and welding seam quality are checked on both the outside and inside. 3.3 VSH Press Sprinkler tools Figure 10: VSH Press Sprinkler tube An important part of the VSH Press Sprinkler range are the press tools which are used to make a press connection. The tools which we prescribe for the VSH Press Sprinkler range consist of a press machine and the accompanying press jaws or slings. Depending on the outside diameter of the tube, you should choose the corresponding press jaws or slings to ensure a completely tight connection. Novopress Klauke Comfort line Basic line Big Press ECO ACO EFP AFP UAP 201/202 201/202 201/202 201/202 100 301 401 Figure 11: Sprinkler approved machines Novopress and Klauke
3 Only tools made by Novopress for the dimensions DN20 to DN100 (22-108 mm) or Klauke for the dimensions DN65 to DN100 (76,1-108 mm) (suitable for M-Profile) are permitted to be used in combination with the VSH Press Sprinkler system. Other brands of machines and press jaws and slings are currently not permitted due to the certification of our sprinkler range. The following machines, press jaws and slings made by Novopress and Klauke are approved. 3.3.1 Range of approved Novopress press machines Novopress ECO 202 DN20-32 (22-35 mm) Power supply Power Piston force Piston stroke Dimensions L x W x H Weight Novopress ACO 202 DN20-32 (22-35 mm) Power supply Power Piston force Piston stroke Dimensions L x W x H Weight 220 - 240 V / 50 Hz 400 W 32 kN 40 mm 429 x 72 x 92 mm 3,9 kg 18 V / 3,0 Ah 400 W 32 kN 40 mm 410 x 80 x 125 mm 3,3 kg 11 • Suitable for dimensions from DN20 to DN32 (22-35 mm) • ECO is mains operated, ACO battery operated with Li-Ion technology • The low weight and ergonomic shape render even narrow press areas readily accessible • Convenience features, such as the electronically controlled press procedure with automatic return and electronic retaining bolt securing device, guarantee perfect pressing • The diagnostic function enables optimum fault analysis for targeted servicing • Short press cycles, irrespective of the nominal widths, guarantee fast and economical working procedures Novopress EFP 202 DN20-32 (22-35 mm) Power supply Power Piston force Piston stroke Dimensions L x W x H Weight 220 - 240 V / 50 Hz 400 W 32 kN 40 mm 446 x 85 x 220 mm 4,1 kg Novopress AFP 202 DN20-32 (22-35 mm) Power supply Power Piston force Piston stroke Dimensions L x W x H Weight 14,4 V / 2,4 Ah 400 W 32 kN 40 mm 385 x 85 x 240 mm 3,9 kg Providing suitable solutions
Page 1 and 2: Galvanized system Stainless system
Page 3 and 4: Contents 1 VSH Fittings B.V. 4 2 VS
Page 5 and 6: 2 VSH Press Sprinkler 2.1 Introduct
Page 7 and 8: 2 2.2.3 Easy & clean The VSH Press
Page 9: 3 VSH Press Sprinkler Stainless fit
Page 13 and 14: 3 3.3.2 Approved Novopress jaws and
Page 15 and 16: 3 3.4 VSH Press flexible hoses The
Page 17 and 18: 4 4 Applications 4.1 Fixed sprinkle
Page 19 and 20: 5.2.2 Material specifications Mater
Page 21 and 22: 5 5.5.3 Deburring the tube The tube
Page 23 and 24: 5 The sizes refer to the general in
Page 25 and 26: 5 5.9.6 Local pressure drops Local
Page 27 and 28: 6 6 Certificates and approvals 6.1
Page 29: 6 6.3 certificate 6.3.1 VSH Press
Page 32 and 33: C 1461 VSH Press Sprinkler Galvaniz
Page 34 and 35: C 1418 Tee threaded (press x female
Page 36 and 37: C 1442 Transition for grooved coupl
Page 38 and 39: R 2750 Stainless steel tube 1.4401
Page 40 and 41: R 2722 Bend 15° (2 x male) R 2717
Page 42 and 43: R 2728 Angle adapter 90° (press x
Page 45 and 46: Sprinkler product range 76 7 Index
Page 47: Tools and accessories 7.3 R 2745 /

VSH Press - Pinhol

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?